Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 12:56 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 30 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat Dec 11, 2010 11:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I am currently waiting on some Super Soft II I have ordered . After breaking the second side it became clear that a new route was needed . In the meantime I have done rough work on the top and back. There is still cleanup work to be done , however the basics are there.

Attachment:
100_0880.jpg
Attachment:
100_0881.jpg
Attachment:
100_0882.jpg
Attachment:
100_0883.jpg
Attachment:
100_0885.jpg
Attachment:
100_0886.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Last edited by WudWerkr on Thu Apr 21, 2011 2:42 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Dec 11, 2010 12:03 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
8-)

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Dec 25, 2010 3:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I have been working on the fretboard and getting it ready to fret . I have encased the fretboard in Cocobolo, the 1/4" Strip running down the neck is a vertical piece . The 1/8" thick piece under the fretboard as well as the binding all glued in place will/ should make for a fairly stable neck. I HOPE

The Cocobolo had more sapwood in it than I would have liked , However I dont believe that it will be to much of a factor. I am waiting to try and get some Padauk Dots for the fret board inlays . I may have to make them , but am looking around first.

Attachment:
100_0888.jpg
Attachment:
100_0889.jpg
Attachment:
100_0890.jpg
Attachment:
100_0891.jpg
Attachment:
100_0892.jpg
Attachment:
100_0893.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Dec 25, 2010 4:25 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
You should give a try to white glue, that dries clear... or even hide glue. Or maybe clean this glue before it get dry.

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Dec 25, 2010 5:02 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I am using titebond orig. I appreciate the suggestion , i guess im not sure where u are refering to in the post . the top and back inside ?

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Dec 25, 2010 5:20 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
I'm refering to the top. We see the yellow dried glue all along the braces. Once dried, Titebond is really a mess to clean up nicely. Clean it with hot wet rag when it's still fresh, it will save you a lot of trouble.

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Dec 25, 2010 9:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Ti-Roux wrote:
I'm refering to the top. We see the yellow dried glue all along the braces. Once dried, Titebond is really a mess to clean up nicely. Clean it with hot wet rag when it's still fresh, it will save you a lot of trouble.



Thanks for the suggestion ! [:Y:]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Mon Jan 03, 2011 1:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Modified the fretboard a little , just to be different. And b4 anyone goes and starts accusing me of herasy , laughing6-hehe , I KNOW I have effectivly cut the playability to 16 frets ! pfft I wanted to Have a Little Different design than normal , cause face it , Im not normal ! laughing6-hehe Mounted the dots " Thanks Chris" and put in frets .
Attachment:
100_0904.jpg


WHY IS IT That the very LAST fret wire installed is ALWAYS the one that tries and tears out ?? [headinwall]


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Fri Jan 07, 2011 8:27 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Nice fret markers.. I didn't know if you would be able to see them. [:Y:]

Don't you dare glue that fretboard on there until you fix the fretboard... remove fret, dam groove, ac glue fill with dust, sand level, clear slot, new fret, no problem!

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Fri Jan 07, 2011 9:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
To be honest Chris , I thought about taking it out and filling with glur and ebony dust , sanding flat and leaving it out . It isnt a playable fret anyway . I havent decided , It is glued in , and needs a lil more touch up .

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Jan 15, 2011 6:55 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
WudWerkr wrote:
To be honest Chris , I thought about taking it out and filling with glur and ebony dust , sanding flat and leaving it out . It isnt a playable fret anyway . I havent decided , It is glued in , and needs a lil more touch up .


Did you get it out of there yet?

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sun Jan 16, 2011 6:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
No chris I havent done anymore with it in tha last week or so , I have been buffing the pearblossom and I made the pickguard . I am going to finish it out I think B4 I go any further on this one . I need Quartersawn Padauk for sides . All I have is flawsawn and I have had no sucess in bending without breaking them . I will get back on it soon though.

Stop by the pearblossom thread and tell me what you think of my pick guard .

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Mon Jan 17, 2011 6:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
WudWerkr wrote:
I need Quartersawn Padauk for sides . All I have is flawsawn and I have had no sucess in bending without breaking them.


Hey Jim,
Guess what i found yesterday. PM your address to me and I'll get this board in the mail to you.

Steve


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Wed Mar 02, 2011 10:59 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
James.... what's going on here? The weather has stunk too much to be outside over the last month...
No pressure. pizza

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Fri Mar 04, 2011 8:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Thanks for the interest chris , [:Y:] actually I have a wife and teenage daughter and ( 1 ) bathroom ,soooooooooooooooooo lately ive been having to go to gas station to get any quality time in bathroom it seems gaah

I have been building a second bathroom im my basement , "just for dad" laughing6-hehe laughing6-hehe . Have cabinets in , tile laid and working on shower area .

I will be back in shop sooon and look forward to posting more on it soon !

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Thu Mar 31, 2011 10:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I have successfully bent the Padauk sides . gaah There are a few check marks I have to work on , but they are done. IF I EVER talk about building with this again someone shoot me !! laughing6-hehe . Actually its beautifull wood , just a pain to bend .

Attachment:
100_1032.jpg
Attachment:
100_1034.jpg
Attachment:
100_1035.jpg
Attachment:
100_1036.jpg
Attachment:
100_1037.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Mon Apr 04, 2011 11:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Tried my hand at my first binding this weekend . I am sure I made several mistakes , but we shall see when its sanded . I used TiteBond Orig. to glue the binding . Is there a better choice? After the binding was set I set the neck and angle . Its held in right now by a drywall screw . I have found they work very well for the smaller Mando's .

Attachment:
100_1038.jpg
Attachment:
100_1044.jpg
Attachment:
100_1045.jpg
Attachment:
100_1046.jpg
Attachment:
100_1048.jpg
Attachment:
100_1049.jpg
Attachment:
100_1050.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Mon Apr 04, 2011 11:04 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Lookin' good James.

I use the same glue although... .I use a lot of tape to hold the binding on as I go... and use the large rubber bands after complete.

Attachment:
Binding-install.jpg


Keep up the good work....


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
PostPosted: Tue Apr 05, 2011 7:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I started sanding the binding and some of it came loose :o [headinwall] Sooooooooo I rerouted the edge and started over. This time using a thick CA and ALOT more clamping / rubberbands . Also I thinned my binding so that it was virtually flush and alot thinner .

We shall see if it sticks this time

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Wed Apr 06, 2011 7:24 am 
Offline
Koa
Koa

Joined: Tue Apr 27, 2010 9:07 pm
Posts: 512
City: Tucson
State: AZ
Country: USA
Focus: Build
Status: Amateur
Love that headstock. Can't wait to see it finished.


Top
 Profile  
 
PostPosted: Thu Apr 21, 2011 2:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
A few more pics of the Padauk Build Top is on , Back is on , Neck is set and the binding has been routed .

Attachment:
100_1067.jpg
Attachment:
100_1066.jpg
Attachment:
100_1068.jpg
Attachment:
100_1070.jpg


The Binding will be cocobolo to match the neck and headstock


You do not have the required permissions to view the files attached to this post.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: More Paduck Pics
PostPosted: Sat Apr 23, 2011 4:08 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 18, 2009 3:11 am
Posts: 140
State: Serbia
Status: Semi-pro
WudWerkr wrote:
IF I EVER talk about building with this again someone shoot me !!



:lol: laughing6-hehe laughing6-hehe laughing6-hehe
I know how are you feeling


Top
 Profile  
 
PostPosted: Sat Apr 23, 2011 4:46 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
At what thickness did you bend?

_________________
Build log


Top
 Profile  
 
PostPosted: Sat Apr 23, 2011 6:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
the sides are .075 thick and I bent with a bending iron [headinwall]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Sat Apr 23, 2011 6:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
Thanks. Good to know as I have a set I might use in the near future. Very nice taptone - this wood seems to have a huge bang for the buck factor, although the color is kind of crazy.
Mine doesn't feel particularly dense and I was planing 0.08 but I might go thinner now.

_________________
Build log


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 30 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com