Official Luthiers Forum!

Hello everyone
just seen this add in my local store
should buy this since its half price (50 euros) 3 times cheaper than anywhere else around
Its 2.5 hp /24L

I was thinking it would be good idea since.... i was sanding some metal
on the belt/disc sander and it set a bit of sawdust allight
i had to take the under disc panel off to get the cinder out
(im gettin d/c soon)

Im not expecting much from it ,other than cleaning my machines
mabye a high powered fret slot cleaner

would it be suitable for anything else though
spraying in the future or small tools?
sorry about the newbie question
Thanks again
Tomas

Hi in order to use a spray gun, you have to match the cfm output of the compressor, to the cfm/s required of the spray gun. My guess , you could get by with a small inexpensive touch up spraygun . Check how many cfm/s it needs first before buying

NO! Run away from that...