***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Aug 21, 2025 10:40 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Mitch Johnson
 Post subject: Testing Specific Gravity
PostPosted: Thu Feb 03, 2011 5:27 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat May 02, 2009 10:53 pm
Posts: 250
First name: Mitch
Last Name: Johnson
City: Little Falls
State: Minnesota
Zip/Postal Code: 56345
Country: USA
Focus: Build
Status: Amateur
How many of you out there test your tops for specific gravity. Is it a waste of time or does it yield some useful info? What are your methods if you do? I was shown a way to do it and I know it's done in the violin world sometimes. Just curious if anyone's doing it.
Top
 Profile  
 
Ti-Roux
PostPosted: Thu Feb 03, 2011 5:47 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 21, 2009 7:46 pm
Posts: 950
First name: Francis
Last Name: Richer
City: Montréal
State: Québec
Zip/Postal Code: H4G 2Z2
Country: Canada
Focus: Build
Status: Semi-pro
It's pretty simple, and you can find density and humidity level at the same time.

Take a scrap that comes from your top. Take the precise volume Witdh x lenght x height. Mesure the weight. Then cook the piece to dry it completly, and mesure it again.

_________________
Francis Richer, Montréal
Les Guitares F&M Guitars
Top
 Profile  
 
Alain Moisan
PostPosted: Thu Feb 03, 2011 6:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Feb 01, 2008 8:47 am
Posts: 1244
Location: Montreal, Canada
Focus: Build
Status: Amateur
Hi Mitch,

I'm not sure what you mean by 'gravity'. Could you explain what you have in mind?

_________________
Alain Moisan
Former full time builder of Acoustics, Classicals and Flamencos.
(Now building just for fun!)
Top
 Profile  
 
Zach Ehley
PostPosted: Thu Feb 03, 2011 7:47 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Oct 10, 2007 2:47 am
Posts: 781
Location: Wauwatosa, WI, USA
Specific gravity is density with 1 equalling pure water as the reference.

Petros has some listed on their site. General numbers at that. http://www.petrosguitars.com/woods.htm
Top
 Profile  
 
Alain Moisan
PostPosted: Thu Feb 03, 2011 10:50 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Feb 01, 2008 8:47 am
Posts: 1244
Location: Montreal, Canada
Focus: Build
Status: Amateur
ok if you see it in the way that specific gravity is another way of expressing density, than yes, many of us care a lot about that. We just tend to stick to the more popular ratio of mass/volume.

_________________
Alain Moisan
Former full time builder of Acoustics, Classicals and Flamencos.
(Now building just for fun!)
Top
 Profile  
 
wbergman
PostPosted: Fri Feb 04, 2011 2:47 pm 
Offline
Koa
Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1584
Location: United States
If you do your volume measure in cubic centimeters and your weight in grams, then divide weight by volume, don't you get specific gravity without further conversion? You would do this on the wood as it is, without toasting it.
Top
 Profile  
 
Jim Watts
PostPosted: Fri Feb 04, 2011 2:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2997
Location: United States
wbergman wrote:
If you do your volume measure in cubic centimeters and your weight in grams, then divide weight by volume, don't you get specific gravity without further conversion? You would do this on the wood as it is, without toasting it.

You do if your water density is actually 1, but the density of water varies with temperature, which is why a temperature is required for specific gravity as Todd pointed out.
The differnce between g/cc and specific gravity is moot for our work.

_________________
Jim Watts
http://jameswattsguitars.com
Top
 Profile  
 
Alain Moisan
PostPosted: Fri Feb 04, 2011 3:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Feb 01, 2008 8:47 am
Posts: 1244
Location: Montreal, Canada
Focus: Build
Status: Amateur
Jim Watts wrote:
The differnce between g/cc and specific gravity is moot for our work.


I would tend to agree with that. It's not like we're doing nuclear science here...

_________________
Alain Moisan
Former full time builder of Acoustics, Classicals and Flamencos.
(Now building just for fun!)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com