Official Luthiers Forum! • View topic

Board index » CNC and Lutherie

All times are UTC - 5 hours

Zenbot....good starter?

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

cyborgcnc

Post subject: Zenbot....good starter?

Posted: Wed Feb 02, 2011 7:02 pm

Cocobolo

Joined: Tue Feb 05, 2008 10:08 pm
Posts: 224
Location: New York

Hi All,

Not sure if you have seen this:

http://www.zenbotcnc.com/merchant2/

Seem like "decent" machines for someone getting started, and wants to learn the CNC process...way cheaper than some of the machines places like rockler are selling.....

Figured it would be of interest...as one of my customer's is about to purchase one and told me about them....we shall see I guess....

_________________
-CyborgCNC
http://www.cncguitar.com
https://www.facebook.com/CncGuitar

Top

Sheldon Dingwall

Post subject: Re: Zenbot....good starter?

Posted: Sat Feb 05, 2011 2:17 pm

Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488

I've often thought of one of those for circuitboards. Any idea of what the step resolution is?

Top

cyborgcnc

Post subject: Re: Zenbot....good starter?

Posted: Sun Feb 06, 2011 1:31 pm

Cocobolo

Joined: Tue Feb 05, 2008 10:08 pm
Posts: 224
Location: New York

Step resolution depends on the drivers...and off course the motors. I am thinking, that they use typical 200 step 1.8 degree motors.

With that said, and a good drivers like keling or gecko, or even cheaper ones, like xylotex, you can further subdivide the steps into microsteps, say 8,10 or 16 for example.

So doing this, a 200 step motor, with say a 10 microstep driver, gives you 2000 steps, or 1/2000 .0005 resolution....you need more than that?

Not sure exactly about your question....

_________________
-CyborgCNC
http://www.cncguitar.com
https://www.facebook.com/CncGuitar

Top

Sheldon Dingwall

Post subject: Re: Zenbot....good starter?

Posted: Sun Feb 06, 2011 4:32 pm

Cocobolo

Joined: Mon Mar 03, 2008 6:51 pm
Posts: 488

Maybe I missworded. I'm wondering what the finest movement the machine can make.

Top

Bob Garrish

Post subject: Re: Zenbot....good starter?

Posted: Mon Feb 07, 2011 12:47 am

Brazilian Rosewood

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional

The manual's posted on the site and has that info:

Quote:

The drive pulley diameter on this machine is 11.6 mm or .45669 inches. The
circumference of the drive pulley is 1.4347. This means that the motor rotates .69701
turns per inch (1/1.4347). The stepper motors on this machine are a standard 1.8
degree per step motor, which means that there are 200 steps per revolution. Now you
just need to know the micro-step settings on your drivers. The formula for calculating
the steps per inch is .69701 x 200 x micro-steps/step. For a 1/8 micro-step driver, the
formula would be .69701 x 200 x 8 = 1115.216 steps per inch.

Micro-step setting Steps per inch
1/10 1394.02
1/8 1115.216
1/4 557.608
1/2 278.804
whole step 139.40

from http://content.zenbotcnc.com/assets/userguides/mini_router_guide.pdf

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services

Top

Jim Watts

Post subject: Re: Zenbot....good starter?

Posted: Mon Feb 07, 2011 1:02 am

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2968
Location: United States

Sheldon Dingwall wrote:

Maybe I missworded. I'm wondering what the finest movement the machine can make.

The real question you need to ask is "what are the finest moves it can repeatably make" which is different than what the screw moves for each pulse of the motor due to play and backlash in the various components.

_________________
Jim Watts
http://jameswattsguitars.com

Top

Page 1 of 1

[ 6 posts ]

Board index » CNC and Lutherie

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: