Official Luthiers Forum! • View topic

Board index » Official Resonator Forum

All times are UTC - 5 hours

make a slide

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

mikemcnerney

Post subject: make a slide

Posted: Tue Feb 15, 2011 11:47 am

Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 514
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur

I'm going to try learning dobro again & the slide i have is over 3" long & very heavey. So at the local store yesterday I saw some nice wooden handled ones. How would you approach making the metal part?
MM

_________________
Mike McNerney

Top

windsurfer

Post subject: Re: make a slide

Posted: Tue Feb 15, 2011 2:08 pm

Cocobolo

Joined: Sat Feb 02, 2008 12:15 pm
Posts: 474
Location: Santa Barbara, Ca
First name: John "jd"
City: Santa Barbara
State: Ca
Focus: Build
Status: Semi-pro

cut the round part from Stainless steel of brass rod. (brass is a lot easier to cut)

brass is normally chrome plated, but the chrome wears out quickly.

another approach would be to polish up a deep socket and glue the handle to it.

you can also cut from glass rod, or anything else that is round and hard that you can polish -even copper pipe

tone is very dependant on the weight.

-jd

Top

Page 1 of 1

[ 2 posts ]

Board index » Official Resonator Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: