***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Aug 22, 2025 8:54 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
Chris Ensor
 Post subject: Tiny Masks
PostPosted: Thu Jun 02, 2011 9:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Dec 05, 2009 3:51 pm
Posts: 1204
First name: Chris
Last Name: Ensor
City: Springfield
State: Missouri
Focus: Build
Status: Professional
Do you masks your tuner holes and the slot in the headstock for the truss rod?

If so, how? Pictures please. Thanks.

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com
Top
 Profile  
 
Dave Fifield
 Post subject: Re: Tiny Masks
PostPosted: Thu Jun 02, 2011 11:34 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 23, 2008 8:05 pm
Posts: 1567
Location: San Jose, CA
First name: Dave
Last Name: Fifield
City: San Jose
State: CA
Zip/Postal Code: 95124
Country: USA
Focus: Build
Status: Amateur
No masking on the tuner holes - I simply reamer out the holes again after finishing.
The problem I see is when you sand between finish coats, you will have a problem with finish depth/flatness with masking around the holes.
I do put a little bit of blue painter's tape over the truss rod hole, but not right up to the edge where the TRC will be (so it's below the sanding level).

HTH,
Dave F.

_________________
Cambrian Guitars

"There goes Mister Tic-Tac out the back with some bric-brac from the knick-knack rack"
Top
 Profile  
 
woody b
 Post subject: Re: Tiny Masks
PostPosted: Fri Jun 03, 2011 5:45 am 
Offline
Koa
Koa
User avatar

Joined: Sat Mar 07, 2009 7:56 am
Posts: 1825
Location: Grover NC
First name: Woodrow
Last Name: Brackett
City: Grover
State: NC
Zip/Postal Code: 28073
Country: USA
Focus: Build
Foam earplugs in the tuner holes. My truss rod access is usually inside the body.

_________________
I didn't mean to say it, but I meant what I said.
http://www.brackettinstruments.com/
Top
 Profile  
 
muthrs
 Post subject: Re: Tiny Masks
PostPosted: Fri Jun 03, 2011 6:56 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Aug 24, 2005 11:15 am
Posts: 356
Location: United States
Focus: Build
Status: Professional
I drill and ream after I finish and buff.

_________________
Randy Muth
RS Muth Guitars Website
RS Muth Guitars Blog
Facebook Fan Page
Top
 Profile  
 
Dave Stewart
 Post subject: Re: Tiny Masks
PostPosted: Fri Jun 03, 2011 7:18 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 31, 2007 7:17 am
Posts: 1383
Location: Canada
I use foam earplugs as well in the tuner holes...clean up after with reamer.
A small piece of acetate, cut slightly oversized, goes into the t'rod nut cavity.

_________________
Dave
Milton, ON
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com