Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Dec 02, 2024 12:48 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: first bass
PostPosted: Fri Jun 24, 2011 3:18 pm 
Offline
Walnut
Walnut

Joined: Fri Apr 01, 2011 9:49 am
Posts: 6
First name: Alec
Last Name: Johnson
Focus: Build
Status: Amateur
I've built electrics with great success, and am now attempting my first bass guitar. PLease let me know about anything i should know. Aside from obvious differences (scale length,#of strings, etc.) are there subtle differences in design between bass and guitar that i should be aware of? Particularly relating to intonation, string action, tuning. Thanks


Top
 Profile  
 
 Post subject: Re: first bass
PostPosted: Fri Jun 24, 2011 9:23 pm 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
Hmmm...hard one to answer but I bet if you have a more specific question there will plenty that will give you some thoughts.

_________________
Brad
Avon, OH


Top
 Profile  
 
 Post subject: Re: first bass
PostPosted: Fri Jun 24, 2011 11:24 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Fender P bass is a good place to start from.
I like the Fender jazz bass pick up at the bridge, and the P bass at dat fretboard.
Have fun.
Or, you could do an original shape, but similar to the fender.
That's what I did once.......
I like 4 strings.
Probably because I'm old.
I do like hearing that low string on a 5 string though.
Sky is da limit!!!!!!!!


Top
 Profile  
 
 Post subject: Re: first bass
PostPosted: Sat Jun 25, 2011 12:14 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
If you are building a 5 string and want the middle string to run down the center of the fretboard right over the dots, and want the outer string edges to be equidistant from the edge of the fretboard (IE both outer strings outer side are 1/8th inches from the fretboard edge) you have to make your bridge slightly off center to accomodate the thicker B string.
http://www.facebook.com/media/set/?set= ... 6f308dc472
Check out the string alignment on this finished bass I made, then in this photo album is a picture of the unfinished bass on the bench without hardware, you can see how the bridge holes are drilled slightly off center to the purpleheart center stripe.
The pickups are routed dead center, and the fretboard is also aligned dead center, only the bridge is offset.

_________________
Old growth, shmold growth!


Top
 Profile  
 
 Post subject: Re: first bass
PostPosted: Sat Jun 25, 2011 10:45 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Good tips, Git-wisp.
I never would have thought about that.
Nice bass on Face B!


Top
 Profile  
 
 Post subject: Re: first bass
PostPosted: Sat Jun 25, 2011 11:07 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Thanx Alan!
I don't know how to upload pictures to this forum directly, or at least resize them so that they'll fit.

_________________
Old growth, shmold growth!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 57 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com