Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 12:00 am


All times are UTC - 5 hours


Forum rules


Same rules apply to all forums at the Luthiers Forum.




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Back in the Shop
PostPosted: Fri Nov 04, 2011 4:00 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I have been away from building for some time now. My new wrap-around pickin' porch has taken far too long although is nearly complete. If we could get the concrete steps to pass inspection we would be ready to install our stair rail and be done with it.

Since we are waiting for our concrete contractor to get done fooling around so we can tear what he has done out and have another contractor come in and do the job correctly I have had some time to get back in the shop.

Here is an a model I started last year and finally go back to this week. It is nearly in the white (should be this weekend). It will be getting a two-color sunburst of which I will post some pics here and more in my shop blog.

Image

Image

Image

Image

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Sat Nov 05, 2011 9:08 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Beautifull work , I love the look of that wood . As for the contractors , good luck , Been there done that and decided to move to an are where the inspections are not required .

where I live , no permit needed , I can do my own work , two basic basic requirements are looked for . 1. poops gotta drain down hill 2 the black wire will ring your chimes ! laughing6-hehe

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Sat Nov 05, 2011 9:46 am 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
WudWerkr wrote:
Beautifull work , I love the look of that wood . As for the contractors , good luck , Been there done that and decided to move to an are where the inspections are not required .

where I live , no permit needed , I can do my own work , two basic basic requirements are looked for . 1. poops gotta drain down hill 2 the black wire will ring your chimes ! laughing6-hehe

eek blisss

There is a lot to be said for less big brother.... they're just looking out for my best interests right? Afterall, they're from the gubment and there to help!

That maple is local and is slipmatched.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Sun Nov 06, 2011 1:13 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
In the white and sounding awesome.

Attachment:
2011-11-06_11-51-50_50-1.jpg


Attachment:
2011-11-06_12-05-13_600-1.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Tue Nov 08, 2011 7:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jan 24, 2008 8:01 am
Posts: 1399
Location: Houston, TX
First name: Chuck
Last Name: Hutchison
City: Houston
State: Texas
Country: United States
Focus: Build
Status: Amateur
WudWerkr wrote:
Beautifull work , I love the look of that wood . As for the contractors , good luck , Been there done that and decided to move to an are where the inspections are not required .

where I live , no permit needed , I can do my own work , two basic basic requirements are looked for . 1. poops gotta drain down hill 2 the black wire will ring your chimes ! laughing6-hehe


Beautiful Mandolin. Bet you can't wait to hear he sing.

That's funny Big Jim. My Father was a plumber/pipefitter in Chicago area and I remember one time he told me the only thing you need to know about plumbing is? Crap don't run up hill, Fridays payday and the boss is an @$$hole.

Funny the things we remember when we were kids. I realize now that it's a common saying, but back then I thought he was so wise.

_________________
"After forty-nine years of violin building, I have decided that the search for a varnish is similar to the fox hunt. The fun is in the hunt."
Jack Batts Maker and Repairer of Fine Violins


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Tue Nov 08, 2011 2:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3293
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
ChuckH wrote:
My Father was a plumber/pipefitter in Chicago area and I remember one time he told me the only thing you need to know about plumbing is? Crap don't run up hill, Fridays payday and the boss is an @$$hole.



I heard it a little different. The third one was "don't bite your nails. . ."
Perhaps I heard it from a self employed plumber :)

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Tue Nov 08, 2011 3:59 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I can't believe this thread has gone to the crapper.

Maybe these pictures will flush it out.
Attachment:
2011-11-06_18-51-23_312-1.jpg


Attachment:
2011-11-07_07-50-06_360-1.jpg


Attachment:
2011-11-07_07-49-45_127-1.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Tue Nov 08, 2011 4:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Lookin goooddd my friend keep us in the loop , Cant wait to see it finished.

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Tue Nov 08, 2011 5:12 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I was just toying with you ...
Attachment:
2011-11-07_09-14-29_107-1.jpg


Attachment:
2011-11-07_09-15-41_930-1.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
PostPosted: Tue Nov 22, 2011 8:10 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I finished that A model on 11-11-11.. oddly enough at 11 am central. I got in the hands of a couple pros that night and the next day at the festival here in town. It received great reviews and many comments on the 'new car' smell. Due to the timing of its completion, Adam Steffey recommended I name it 'Eleven'. Seems reasonable to me... so here is 'Eleven'.

This is an A model using f5 scale and fretboard. I moved the bridge back to the middle of the instrument (and it's carved to have it there not just moved). The top is sitka, back sides and neck hard maple, neck and tail blocks are old growth mahogany, fretboard and fretboard extender are African blackwood, ebony adjustable bridge and headstock veneers, tailpiece is Bill James engraved with 'Infinity Luthiers', celluloid nitrate bindings on body and fretboard, cow bone nut, MOP fret markers, headstock logo and fretboard service mark, Grover tuners with perloid buttons, 2 color sunburst (amber/tobacco) with hand-rubbed finish.

I rings like a bell and has unnaturally long sustain.

Here is a short (3 a.m.) clip of Mark Fowler of Truman's Ridge messing around. Listen to this, then think about how good he is fresh! I'll be creating a youtube video of the construction of this mando and background will be a lot more of Mark's excellent test drive.

click me--> short clip

Attachment:
AmodelSitka-back.jpg


Attachment:
AmodelSitka11-11-11-front.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Sun Dec 18, 2011 4:52 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
I finally got some better pics of the mando while on holiday.

Attachment:
Amodel-11-11-11-b.jpg

Attachment:
Amodel-11-11-11-a.jpg

Attachment:
Amodel-11-11-11-c.jpg

Attachment:
Amodel-11-11-11-e.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Wed Jan 18, 2012 4:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jun 04, 2007 3:31 am
Posts: 904
Location: Candler, NC United States
Beautiful mandolin, Chris! I'm experiencing the joys of binding an F5 at the moment [clap] [headinwall] [clap] [headinwall]
Next several will be A's for sure...

Hope you're well, my friend. Let's get together before the next GAL get-together!
Peace.

Ken

_________________
Mountain Song Guitars www.mountainsongguitars.com


Top
 Profile  
 
 Post subject: Re: Back in the Shop
PostPosted: Wed Jan 18, 2012 4:15 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Apr 03, 2007 7:16 am
Posts: 567
Location: United States
Thanks Ken! Good to hear from you.... btw... checked your email since August? ;) Let me know if you have any plans of driving through the midwest. Otherwise I'll be here in Springfield and in Nashville periodically.

Binding an F..... nice. Can't wait to see it! Post here when you are done.

_________________
Chris Oliver
Infinity Luthiers
...in the shop.

live every minute...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com