***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 9:22 am


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
sdsollod
PostPosted: Sat Jan 21, 2012 4:32 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I have a nice ziricote bridge blank. It has some sapwood. When cutting the ziricote fingerboard I noticed that the sapwood appeared to be kinda soft compared to the part without sapwood. ...or am I mistaken? :?

I was wondering if the sapwood portion is too soft to locate the saddle slot. Should I avoid putting the saddle slot in the sapwood portion?

Any constructive comments are appreciated. [:Y:]

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com
Top
 Profile  
 
sdsollod
PostPosted: Sun Jan 22, 2012 11:30 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Doesn't anybody know if sapwood is softer...? idunno Would it be a bad idea to put the saddle slot in ziricote sapwood?

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com
Top
 Profile  
 
Tony_in_NYC
PostPosted: Sun Jan 22, 2012 11:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
I don't know the answer, but I think you answered your own question. If the sapwood seemed softer when cutting, it probably is. If it seems too soft for the saddle slot, don't use it. If it seems like it is stable, use it. Sorry I can't offer you better advice based on my personal observations, I have not had this situation come up yet personally.

_________________
http://www.CostaGuitars.com
PMoMC
Top
 Profile  
 
WindyCityBluesBox
PostPosted: Sun Jan 22, 2012 12:35 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu May 12, 2011 3:27 pm
Posts: 213
First name: Alex
Last Name: Takacs
State: Illinois
Country: United States
Focus: Build
Status: Amateur
I also dont have much experience with sapwoods. I would say the best thing to do is to run some tests. My biggest worry about it would be the softer woods ability to carry vibrations from the bridge to the body of the guitar.
Top
 Profile  
 
James Ringelspaugh
PostPosted: Sun Jan 22, 2012 1:51 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jan 08, 2007 3:47 pm
Posts: 1213
Location: Raleigh, NC
First name: Ringo
By definition sapwood does not have the extractives that heartwood does. The extractives generally don't affect strength but - along with giving heartwood its distinctive color - they can affect hardness and dimensional stability. So as long as the difference in hardness wouldn't be a problem you'd probably be fine using it to hold a saddle.
Top
 Profile  
 
alan stassforth
PostPosted: Sun Jan 22, 2012 1:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Are you building an electric with a wood bridge?
Top
 Profile  
 
Bobc
PostPosted: Sun Jan 22, 2012 4:42 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
Ziricote sapwood is not soft unless it is heavily spalted. If in doubt flood with thin CA after slotting.

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498
Top
 Profile  
 
VirgilGuitar
PostPosted: Sun Jan 22, 2012 4:54 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Apr 13, 2011 9:21 am
Posts: 783
First name: Virgil
Last Name: Mandanici
State: FL
Focus: Build
Hehehe I was just getting ready to say to soak it in thin CA glue - that should stabilize it, but Bob beat me!

_________________
"Talking about music is like dancing over architecture".
See the most insane first guitar build: http://www.virgilguitar.com
http://www.youtube.com/VirgilGuitar
Top
 Profile  
 
sdsollod
PostPosted: Sun Jan 22, 2012 6:42 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Thanks for the replies... I think I'll put the sapwood at the other end - that is, toward the end wedge. That way I'll get to see the sapwood, but eliminate any doubt I may have about it's possible instability for the saddle slot...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com