Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 6:22 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Strat tremelo question
PostPosted: Sun Mar 04, 2012 10:18 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Mar 11, 2008 12:28 pm
Posts: 383
First name: William
Last Name: Snyder
City: Brooklyn
State: NY
Country: United States
Focus: Build
Status: Amateur
A friend of mine just switched to heavier gauge strings on his strat and the added tension is pulling his tremelo forward a bit. He asked me how to remedy this. I would assume, if nothing else, you could find heavier springs for the tremelo. But being pretty much strictly an acoustic (mostly classical) guy and not having taken a look at it in person I'm really not sure.
So I thought I'd ask you guys with electric experience. How would you fox this?
Thanks


Top
 Profile  
 
PostPosted: Sun Mar 04, 2012 10:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
There is a screw that tightens the springs.
There is a lot of travel for the screw.
Take the back cover off and you will see what I mean.
I think there are 3 springs?
Maybe room for more.
I can't remember...


Top
 Profile  
 
PostPosted: Sun Mar 04, 2012 12:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5822
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Actually - there are two screws.
But, yeah - tighten them up until the vibrato returns to the position the client desires.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Sun Mar 04, 2012 1:10 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
I prefer to have the springs as short as possible to prevent bottoming out when whammying. It may be advisable to put an extra spring in there and loosen the screws. How heavy are the strings? I like 3 springs for 9's and 4 springs for 10's.

_________________
Old growth, shmold growth!


Top
 Profile  
 
PostPosted: Sun Mar 04, 2012 4:32 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Mar 11, 2008 12:28 pm
Posts: 383
First name: William
Last Name: Snyder
City: Brooklyn
State: NY
Country: United States
Focus: Build
Status: Amateur
Thanks guys.


Top
 Profile  
 
PostPosted: Mon Mar 05, 2012 8:45 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Jul 01, 2011 9:17 am
Posts: 381
First name: Michael
State: AR
Country: USA
Focus: Build
Status: Amateur
William here is my take on it-

3 springs ( my preferece) and they should be straight- not in a "V" as many set theirs.

Start by adjusting the two screws so when the bar is raised and the bridge touches the
body that the G string raises a minor 3rd. ( this should make the B string raise a whole step and
the E string a half step.)

Next adjust the spring on the bass side (low E string) so that when the bar is raised and the bridge
touches the body that the A and D strings when fretted at the 5th fret ( D,G) raise a whole step to E and A.

One may have to go back and forth to get this balanced out.

When it's done one can play an Am7 at the fifth fret and lower the trem bar and get a pretty good sounding
Abm7.

Not only is this a "musical" approach to adjusting the trem but I believe it to be one that really helps keep
the guitar in tune when using the trem.
The intonation will need to be adjusted too. A little lube on the nut and it should be good to go.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com