Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 5:44 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Pedal selector
PostPosted: Tue Mar 06, 2012 2:24 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Sun May 08, 2011 10:24 am
Posts: 57
Location: Israel
First name: Hillel
Last Name: Levy
City: Rehovot
Country: Israel
Focus: Build
Status: Amateur
I would like some advice for a problem I have with switching between pedals.

I've got a distortion pedal and overdrive pedal.
I always play with either the distortion or the overdrive but never both together.
Problem is, switching between them (turning one off and the other on simultaneously) is inconvenient.

I want to build a pedal that will switch between them.
That way they are both on all the time and I just tap the pedal to choose which one I want to forward to the amp.
This means I need to split the guitar cord so it goes into the effect pedals separately and then they'll both be outputted to the selector pedal.
The selector pedal will consist of 2 inputs --> 1 toggle switch --> 1 output (to amp).

Any simpler ideas for a solution ?
Any advice for this idea ?


You do not have the required permissions to view the files attached to this post.

_________________
Image


Top
 Profile  
 
 Post subject: Re: Pedal selector
PostPosted: Tue Mar 06, 2012 2:39 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 12, 2011 9:38 am
Posts: 56
First name: Mike
Last Name: Hoenerhoff
City: Ann Arbor
State: MI
Zip/Postal Code: 48105
Country: USA
Focus: Repair
Status: Professional
You could pretty easily build an AB looper (as in, FX loop, not delay looper), using 6 1/4" jacks, a 3pdt switch (or dpdt, if you don't want an LED indicator), and a small aluminum enclosure. Basically it would be built just like any other True bypass loop you find, except the jumper on the switch that bypasses the loop would connect to another loop.

I may already have a diagram doodled up... I'll check.

_________________
-—-—-—-—-—-—-
Mike Hoenerhoff
Elderly Instruments


Top
 Profile  
 
 Post subject: Re: Pedal selector
PostPosted: Tue Mar 06, 2012 2:39 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
i have one of these, it would work:
http://www.sweetwater.com/store/detail/ ... QAodQx9BBg


Top
 Profile  
 
 Post subject: Re: Pedal selector
PostPosted: Tue Mar 06, 2012 2:56 pm 
Offline
Mahogany
Mahogany

Joined: Fri Aug 12, 2011 9:38 am
Posts: 56
First name: Mike
Last Name: Hoenerhoff
City: Ann Arbor
State: MI
Zip/Postal Code: 48105
Country: USA
Focus: Repair
Status: Professional
Here's a very crude doodle, but should give you the idea. You'd put one effect in each loop (send->input, output-> return), and the switch toggles back and forth between them. This drawing shows LED indicators as well, but if you don't need them you can ignore them, and the 9v connections and resistor as well. You also won't need to use a stereo jack on the input to disconnect the battery when the input is unplugged. You can also use a Dpdt, disregarding the middle column on the switch below. Without LEDs there no need for power, it will be completely passive.

Image

If you want to use LEDs, and want to wire up a DC jack for a power supply/daisy chain that is also doable.

_________________
-—-—-—-—-—-—-
Mike Hoenerhoff
Elderly Instruments


Top
 Profile  
 
 Post subject: Re: Pedal selector
PostPosted: Tue Mar 06, 2012 3:00 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Sun May 08, 2011 10:24 am
Posts: 57
Location: Israel
First name: Hillel
Last Name: Levy
City: Rehovot
Country: Israel
Focus: Build
Status: Amateur
MikeH wrote:
Here's a very crude doodle, but should give you the idea. You'd put one effect in each loop (send->input, output-> return), and the switch toggles back and forth between them. This drawing shows LED indicators as well, but if you don't need them you can ignore them, and the 9v connections and resistor as well. You also won't need to use a stereo jack on the input to disconnect the battery when the input is unplugged. You can also use a Dpdt, disregarding the middle column on the switch below. Without LEDs there no need for power, it will be completely passive.

Image

If you want to use LEDs, and want to wire up a DC jack for a power supply/daisy chain that is also doable.




Wow !
Couldn't ask for a better and quicker response.
Thanks a lot.

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com