Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 4:32 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu May 10, 2012 10:40 am 
Offline
Koa
Koa
User avatar

Joined: Tue Dec 15, 2009 1:46 pm
Posts: 667
First name: Robert
Last Name: Renick
City: Mount Shasta
State: ca
Zip/Postal Code: 96067
Country: us
Focus: Build
Status: Amateur
This is a guitar that I always wanted, an electric with wide string spacing like we see on "finger style" guitars. It came out well, very comfortable, light, a nice pallet of tones.
3 piece neck through, maple-port orford-maple
Port orford body, cherry trim
Compound FB, maple, 9-18 radii
1 13/16 nut ( a little too wide)
2 1/4 saddle spacing
Neck pup EMG 89XR (active pup with coil tap)
Saddles are Baggs T bridge inserts with a control X to blend the signals.
Total weight 6 pounds


You do not have the required permissions to view the files attached to this post.

_________________
http://shastaguitar.com/
http://www.kalimbakit.com/
http://www.youtube.com/user/comfyfootgr ... ature=mhee
http://www.facebook.com/robert.renick.7


Last edited by Robert Renick on Thu May 17, 2012 8:51 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Electric fingerstyle
PostPosted: Thu May 10, 2012 11:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5822
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Cool beans.
I built a chambered electric with no taper in the string spacing 20-some years ago for a local jazzer.
He still uses it daily in his classes and while gigging.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Electric fingerstyle
PostPosted: Fri May 11, 2012 10:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Nice!
I would love to hear it with just the bridge pick ups.
Are those piezos?
Does it sound like an acoustic?
I'll have to look them up!
[:Y:] [:Y:] [:Y:]


Top
 Profile  
 
 Post subject: Re: Electric fingerstyle
PostPosted: Fri May 11, 2012 12:41 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Dec 15, 2009 1:46 pm
Posts: 667
First name: Robert
Last Name: Renick
City: Mount Shasta
State: ca
Zip/Postal Code: 96067
Country: us
Focus: Build
Status: Amateur
The bridge pickups sound very nice, but as far as acoustic, it is a reasonable approximation, perhaps on par with a basic acoustic bridge pickup on a mid range guitar for acoustic tone, but they do have a sparkley and clear tone to them. I have an I Beam on one of the acoustics I made, so that is what I have to compare it to, the I beam on the acoustic is a different animal in terms of true acoustic tone. There is a sweet spot in the blend leaning mostly to the acoustic side that makes for this crisp and full tone, with both the single coil and the humbucker. The Baggs product, the T bridge is generally a TOM replacement, I just used the elements so I could achieve the string spacing I wanted.
I did glue in a cheap piezo in the cavity, inspired by Phillip Patton's efforts, they had some great output, but it was a brash and untamed sound that was able to pick up my hand touching the neck, they are not connected to anything right now.
My friend ran through some tones when I first wired it, I think he may have some effects on, so it is not a very satisfying sound clip. He is performing with it tomorrow, hopefully some nice video from that.
Any way:
http://www.youtube.com/watch?v=AEDf-eQZ ... ature=plcp

_________________
http://shastaguitar.com/
http://www.kalimbakit.com/
http://www.youtube.com/user/comfyfootgr ... ature=mhee
http://www.facebook.com/robert.renick.7


Top
 Profile  
 
 Post subject: Re: Electric fingerstyle
PostPosted: Fri May 11, 2012 8:42 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Excellent video!
That thing sounds really good.
I've been thinking about making one with that pickup config for 16 years!
Congrats!
I have an LR Baggs lb 6 pickup.
Maybe I'll try that.
Think that would work?


Top
 Profile  
 
 Post subject: Re: Electric fingerstyle
PostPosted: Fri May 11, 2012 8:59 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Dec 15, 2009 1:46 pm
Posts: 667
First name: Robert
Last Name: Renick
City: Mount Shasta
State: ca
Zip/Postal Code: 96067
Country: us
Focus: Build
Status: Amateur
Alan,
I did actually ask the Baggs tech about that, apparently the LB6 has 6 pickups in it, but 2 are out of phase for some good reason I am sure, but that prohibits it from working properly with the control x which is the blender circuit.

It is a nice combo, it leans the guitar toward country, jazz, while still having the ability for a hot rock solo, it has enough output to overdrive an amp for classic crunch. Hey, this is the Lindsey Buckingham configuration, so it can work in his diverse range.

Another cool thing with the electronics is that they are silent, there is no ground hum or change when you touch the strings.
Rob

_________________
http://shastaguitar.com/
http://www.kalimbakit.com/
http://www.youtube.com/user/comfyfootgr ... ature=mhee
http://www.facebook.com/robert.renick.7


Top
 Profile  
 
PostPosted: Thu May 17, 2012 8:53 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Dec 15, 2009 1:46 pm
Posts: 667
First name: Robert
Last Name: Renick
City: Mount Shasta
State: ca
Zip/Postal Code: 96067
Country: us
Focus: Build
Status: Amateur
This is a fun clip, the performer, Ryan Marchand, traveled all the way to Los Angeles for this gig, and requested to use my new guitar to play the Star Spangled Banner, glad to oblige.

http://www.youtube.com/watch?v=CXfc2FxT ... ature=plcp

_________________
http://shastaguitar.com/
http://www.kalimbakit.com/
http://www.youtube.com/user/comfyfootgr ... ature=mhee
http://www.facebook.com/robert.renick.7


Top
 Profile  
 
PostPosted: Fri May 18, 2012 9:26 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Ha!
Sounds great!
Kid is a good player, too, IMO.
I asked the Baggs tech about the LB6 installed in a slab git,
and he said it would work.
He also said they installed one in a git for Chet Atkins.
Since I have one laying around,
I'm going to use it on my next solid body.
(Don't hold yer breath!)


Top
 Profile  
 
 Post subject: Re: Electric fingerstyle
PostPosted: Wed May 23, 2012 1:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
comfyfoot wrote:
The bridge pickups sound very nice, but as far as acoustic, it is a reasonable approximation, perhaps on par with a basic acoustic bridge pickup on a mid range guitar for acoustic tone, but they do have a sparkley and clear tone to them. I have an I Beam on one of the acoustics I made, so that is what I have to compare it to, the I beam on the acoustic is a different animal in terms of true acoustic tone. There is a sweet spot in the blend leaning mostly to the acoustic side that makes for this crisp and full tone, with both the single coil and the humbucker. The Baggs product, the T bridge is generally a TOM replacement, I just used the elements so I could achieve the string spacing I wanted.
I did glue in a cheap piezo in the cavity, inspired by Phillip Patton's efforts, they had some great output, but it was a brash and untamed sound that was able to pick up my hand touching the neck, they are not connected to anything right now.
My friend ran through some tones when I first wired it, I think he may have some effects on, so it is not a very satisfying sound clip. He is performing with it tomorrow, hopefully some nice video from that.
Any way:
http://www.youtube.com/watch?v=AEDf-eQZ ... ature=plcp

It sounds like a dream. Wonderful switch options with varied tones. I salute you.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com