Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 1:56 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Wed Jan 09, 2013 9:56 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Mar 28, 2008 8:35 am
Posts: 348
Location: Spartanburg SC
First name: Richard
Last Name: Sprouse
City: Spartanburg
State: SC
Zip/Postal Code: 29302
Country: USA
Focus: Build
Status: Amateur
Ok, this seems to me to be a silly question but I just pick up a bolt on electric and took the neck off to inspect the serial #. When I replaced the neck the action changed quite a bit ( much lower) lots of fret buzz. Whats going on?


Richard


Top
 Profile  
 
PostPosted: Thu Jan 10, 2013 5:36 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Was there a shim under the neck when you took it off? A little piece off paper, something like a part of a match pack?

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Thu Jan 10, 2013 1:22 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
In answer to your "What's going on?" question, you changed the neck angle slightly when you replaced the neck. Bolt-on necks frequently have a thin shim to refine the neck angle, and very small differences are noticible.
You can either take the neck off and re-shim it, or you may be able to raise the bridge slightly.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Fri Jan 11, 2013 10:40 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Apr 28, 2012 7:27 pm
Posts: 277
First name: James
Last Name: Greene
State: Maine
Focus: Build
Status: Semi-pro
With no string tension, saddle adjusters easily move around on their own as well. If not a missing neck shim, it's possible your bridge saddles moved lower.


Top
 Profile  
 
PostPosted: Sat Jan 12, 2013 5:31 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Look around on the floor below where you removed the neck for the shim, if it didn't fall off onto the bench. It'll be a small rectangular piece of wood or business card type material. Or a piece of an actual business card even!

_________________
Old growth, shmold growth!


Top
 Profile  
 
PostPosted: Sat Jan 12, 2013 4:00 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Feb 07, 2011 8:15 pm
Posts: 529
First name: Mark
Last Name: Sorrentino
Focus: Build
Status: Amateur
The OP has left the building. Must not have been a very important instrument.

_________________
http://www.tinyhouseandland.com


Top
 Profile  
 
PostPosted: Mon Jan 14, 2013 10:33 am 
Offline
Walnut
Walnut

Joined: Thu Jan 03, 2013 2:23 pm
Posts: 24
First name: Christopher
Last Name: Parker
City: Fatetteville
State: AR
Zip/Postal Code: 72701
Country: USA
Focus: Repair
Status: Professional
H i guys - first post: Another possibility (aside from a missing neck shim) - the neck screws may be threading into the holes in the body, and it's in some sort of bind. It's best for holes in the body to be large enough so that the screws pass through without threading into it, otherwise there is potential for the neck to not sit flush against the bottom of the neck pocket.


Top
 Profile  
 
PostPosted: Tue Jan 15, 2013 11:35 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Nov 20, 2012 8:59 pm
Posts: 372
First name: Aaron
Last Name: Thompson
City: Atlanta
State: Ga
Zip/Postal Code: 30308
Country: USA
Focus: Build
Status: Semi-pro
Yep. Sounds like a lost shim to me. It's happened to me before, but I caught it before reassembling, luckily.

_________________
"I'm not going to say that perfection has never been achieved. However, if it has, it probably went unnoticed due to it's lack of character."


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com