***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 11:11 pm


Board index » Fixture, Video and Picture Tutorials

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
LanceK
PostPosted: Mon May 21, 2012 12:50 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Shane at High Mountain Tonewoods.

Shane created these files and sent them to me a while ago and asked if I could host them. I have uploaded them to my guitar site.
You should be able to right click and "save as"
After you down load, rename your files and add .xlsx as the extension.

Big thanks to Shane!

http://www.kragenbrinkguitars.com/olffiles/RadiusOffsets

http://www.kragenbrinkguitars.com/olffiles/ScaleLengthCalculator

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com
Top
 Profile  
 
Steve_E
PostPosted: Mon May 21, 2012 5:12 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 04, 2009 1:13 pm
Posts: 215
First name: Steve
Last Name: Ellis
City: Manteca
State: CA
Zip/Postal Code: 95337
Country: USA
Focus: Build
Status: Amateur
Lance, are these spreadsheets (per the topic)? I tried to open/save them as excel files, but they don't want to open.

Steve
Top
 Profile  
 
Robbie_McD
PostPosted: Mon May 21, 2012 6:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 28, 2009 10:34 pm
Posts: 1065
First name: Rob
Last Name: McDougall
City: Cochrane
State: Alberta
Just add an .xls extension to the downloaded file and open in Excel.
Top
 Profile  
 
NWflyonly
PostPosted: Thu Jun 07, 2012 10:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Apr 03, 2009 2:46 pm
Posts: 243
First name: Mark
Last Name: Morris
City: Sedona
State: AZ
Zip/Postal Code: 86339
Country: USA
Focus: Build
Status: Amateur
I added the .xls and they opened with jiburish?
Top
 Profile  
 
Shane Neifer
PostPosted: Tue Sep 11, 2012 12:50 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
To open just right click the files and select "open with excel" They will work fine then (They did for me anyways).

I built these files for my cnc work but they are great for those of you that want to hand saw fret boards and to check to see if your radius dish is right. If you have any questions about the files just let me know.

Thanks
Shane

_________________
Canada
Top
 Profile  
 
Heinjus guitars
PostPosted: Mon Nov 18, 2013 3:08 am 
Offline
Walnut
Walnut

Joined: Mon Oct 21, 2013 1:27 am
Posts: 2
First name: Matt
Last Name: Heinjus
City: Melbourne
State: Vic
Zip/Postal Code: 3068
Country: Australia
Focus: Build
Status: Amateur
Hi shane, don't suppose you would have a cnc code written up for radius dishes you would like to share? I have a guy who will machine some dishes for me but unfortunately when it comes to writing the necessary program i just dont have the skills to pay the bills. Radius dishes are ridiculously overpriced to purchase here in australia and too big and costly to import.
Top
 Profile  
 
Heinjus guitars
PostPosted: Sat Nov 23, 2013 9:25 pm 
Offline
Walnut
Walnut

Joined: Mon Oct 21, 2013 1:27 am
Posts: 2
First name: Matt
Last Name: Heinjus
City: Melbourne
State: Vic
Zip/Postal Code: 3068
Country: Australia
Focus: Build
Status: Amateur
Anyone???
Top
 Profile  
 
Ruby50
PostPosted: Sun Feb 23, 2014 9:19 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
If you have an offset and a baseline length, here is an easy method to draw the arc. You can use the arc to make a jig for routing out a radius dish, you can use it to make the little piles of index card at different locations to simulate it, or you n=can make a radius batten with it.

http://www.flickr.com/photos/ruby1638/s ... 172644427/
Top
 Profile  
 
aqualibguitars
PostPosted: Fri Mar 21, 2014 12:50 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Nov 02, 2010 2:52 pm
Posts: 204
First name: Rahoul
Last Name: waghmare
City: pune
State: maharashtra
Zip/Postal Code: 411044
Country: india
Focus: Build
Status: Amateur
yes i opened in office 2007
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Fixture, Video and Picture Tutorials

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com