***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 6:32 am


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Marzano San
PostPosted: Wed Jan 22, 2014 12:56 pm 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
Hiya All,
As I've been asked to make a custom housing for a P90 soapbar pickup, I'm looking for the correct dimensions of this pickup.
Don't have one laying around I can measure up.
If anyone got the specs of a soapbar p90 and willing to share, that would be fab!
Looking for the corner radius of the pickup and cover, pole piece spacing, pole piece ø, screw spacing, Pickup thickness, cover thickness etc.,etc,...
Respect,
Hilko.

_________________
FB Page
Top
 Profile  
 
turmite
PostPosted: Thu Jan 23, 2014 2:15 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 09, 2008 2:39 am
Posts: 519
https://www.google.com/search?q=p90+soa ... B756%3B529

Maybe this will help!

Mike
Top
 Profile  
 
Marzano San
PostPosted: Thu Jan 23, 2014 2:38 am 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
turmite wrote:
https://www.google.com/search?q=p90+soapbar+dimensions&newwindow=1&safe=active&espv=210&es_sm=93&source=lnms&tbm=isch&sa=X&ei=7cDgUpXNGsfukQfZmoHwBw&ved=0CAoQ_AUoAg&biw=1280&bih=619#facrc=_&imgdii=_&imgrc=AJd0BVpAupWVRM%253A%3BAynHtoZc6KKrYM%3Bhttp%253A%252F%252Fwww.seymourduncan.com%252Fimages%252Fdimensions%252Fstkp1.gif%3Bhttp%253A%252F%252Fwww.tdpri.com%252Fforum%252F659253-post1.html%3B756%3B529

Maybe this will help!

Mike

Thanks! One step closer :)
Any additional info welcome.
Respect.

_________________
FB Page
Top
 Profile  
 
Marzano San
PostPosted: Thu Jan 23, 2014 4:16 am 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
Just drew the pickupcover (rhino 3D). I'm waiting now for my client to send me his artwork.
Quickly added my logo on the pickup. Here are some screenshots
Image
Image
Image

_________________
FB Page
Top
 Profile  
 
RandK
PostPosted: Fri Jan 24, 2014 3:42 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 28, 2013 8:29 pm
Posts: 113
First name: Rand
Last Name: Kennedy
State: CO
Focus: Build
Status: Semi-pro
P90's are not all the same size. I would suggest getting one and a properly fitting plastic cover for it before trying to replicate that. If it is going into a routed guitar it will be especially important to match the dimensions of the route and know how much clearance you have to work with. I used to make my body routes very tight to the covers because it looks nice but not so nice when a customer wants to change the pickups and you discover the covers are not a standard size and the baseplates don't always fit the original cover that fits. Nice model !
Top
 Profile  
 
Marzano San
PostPosted: Sat Jan 25, 2014 2:43 am 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
RandK wrote:
P90's are not all the same size. I would suggest getting one and a properly fitting plastic cover for it before trying to replicate that. If it is going into a routed guitar it will be especially important to match the dimensions of the route and know how much clearance you have to work with. I used to make my body routes very tight to the covers because it looks nice but not so nice when a customer wants to change the pickups and you discover the covers are not a standard size and the baseplates don't always fit the original cover that fits. Nice model !

Thanks for the input!
Yes I've noticed P90's sizes vary that's why I was asking for correct specs. No such thing unfortunately.
Might be a good idea to order a few P90's pickups from different companies (Seymour Duncan, Lollar and Bare Knuckle) and see how much they vary.

_________________
FB Page
Top
 Profile  
 
RandK
PostPosted: Sat Jan 25, 2014 11:36 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jan 28, 2013 8:29 pm
Posts: 113
First name: Rand
Last Name: Kennedy
State: CO
Focus: Build
Status: Semi-pro
I think some variation comes from the injection molding.
See if this helps:

Mfg / Model Width Height Thickness
Duncan P90 3.3 1.28 0.62
Duncan Vintage 3.3 1.28 0.745
Duncan Antiquity 3.365 1.365 0.64
Lollar P90 3.36 1.37 0.63
Gibson P90 3.385 1.39
NEW Lollar P90 3.39 1.39 0.645

spec dims 3.375 1.375
Top
 Profile  
 
Marzano San
PostPosted: Sun Jan 26, 2014 9:15 am 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
Thanks for the info RandK! Very helpful!

_________________
FB Page
Top
 Profile  
 
Marzano San
PostPosted: Wed Feb 05, 2014 1:12 pm 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
They guy pulled out, never heard from him again.
As I was too curious how good a 3D printer is I ordered my model.
Got it printed in Alumide and it fits great.
A friend lend me a P90 to try on the cover [:Y:]
Here are some shots
Image

Image

Image

Image

_________________
FB Page
Top
 Profile  
 
Marzano San
PostPosted: Wed Feb 05, 2014 2:25 pm 
Offline
Mahogany
Mahogany

Joined: Wed Oct 09, 2013 8:55 am
Posts: 55
Location: Kaboutersem
First name: Hilko
Last Name: Nackaerts
Country: Belgium
Focus: Build
verhoevenc wrote:
What would stuff like this cost?

About 20€ VAT incl. my place is not even 5min. drive from the 3D printing company imaterialize in Belgium. So I don't pay shipping ;)

_________________
FB Page
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com