***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 29, 2024 2:33 am


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 2
  [ 27 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Kent Wilkinson
PostPosted: Sun Oct 20, 2013 5:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
Top is 80 year old cedar barn siding. body is poplar.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
Chris Pile
PostPosted: Sun Oct 20, 2013 5:14 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5825
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Very rustic.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
Mike Baker
PostPosted: Mon Oct 21, 2013 12:48 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Cool! I would have been tempted to cut the top pieces between the grooves, glue them up flush and sand it down smooth. That would have been beautiful with a good nitro finish. But I love rustic builds as well, especially old or reclaimed wood. Like the "f" hole design as well. Looking forward to the rest of this.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
dzsmith
PostPosted: Mon Oct 21, 2013 5:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Sweet Kent!

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Quine
PostPosted: Tue Oct 22, 2013 5:19 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 18, 2008 11:42 am
Posts: 1135
Location: Hudson, MA
First name: Kevin
Last Name: Quine
City: Hudson
State: MA
Country: Usa
Focus: Build
Status: Amateur
Hope you can keep the weathered lines while finishing
Top
 Profile  
 
dzsmith
PostPosted: Tue Oct 22, 2013 9:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Weathered, rusted, or hammered hardware would look cool.
Also, cow-skull knobs (everyone likes skulls).
Maybe a piece of barbed wire somewhere.
I'm curious to know what sort of finish you will use.
Cool Kent!

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Kent Wilkinson
PostPosted: Tue Oct 22, 2013 9:50 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
dzsmith wrote:
Weathered, rusted, or hammered hardware would look cool.
Also, cow-skull knobs (everyone likes skulls).
Maybe a piece of barbed wire somewhere.
I'm curious to know what sort of finish you will use.
Cool Kent!


Barbed wire binding. I wonder if I could make it work.
Top
 Profile  
 
Kent Wilkinson
PostPosted: Wed Oct 23, 2013 6:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
Today I sanded the sides to match the top plate. Next I need to rout the neck pocket. I laid the neck on the body to see what it will look like.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
dzsmith
PostPosted: Wed Oct 23, 2013 6:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Neat-o!
May want to paint under the F hole for more pop.

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Kent Wilkinson
PostPosted: Wed Oct 23, 2013 7:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
dzsmith wrote:
Neat-o!
May want to paint under the F hole for more pop.


Wish I had painted the cavity flat black before putting the top on.
Top
 Profile  
 
Mike Baker
PostPosted: Wed Oct 23, 2013 8:09 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Way way liking that!

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.
Top
 Profile  
 
fingerstyle1978
PostPosted: Thu Oct 24, 2013 4:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Kent Wilkinson wrote:
dzsmith wrote:
Neat-o!
May want to paint under the F hole for more pop.


Wish I had painted the cavity flat black before putting the top on.


Can't you mask the top off and lightly paint it with a brush or spray?
Top
 Profile  
 
Kent Wilkinson
PostPosted: Thu Oct 24, 2013 8:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
fingerstyle1978 wrote:
Kent Wilkinson wrote:
dzsmith wrote:
Neat-o!
May want to paint under the F hole for more pop.


Wish I had painted the cavity flat black before putting the top on.


Can't you mask the top off and lightly paint it with a brush or spray?


I will give it a try.
Top
 Profile  
 
Kent Wilkinson
PostPosted: Fri Oct 25, 2013 3:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
Barncaster update. Knobs. Have been trying to figure out what I can us for knob and flow with the project. So I took a old wine cork, Cut it in half, and drilled it to fit the shaft of the pot. I like the way it turned out. I might stain it a little darker. I also counter sunk it a little to give it a skirt to hang over the retainer nut.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
dzsmith
PostPosted: Fri Oct 25, 2013 5:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Cool Kanobage!

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
James T
PostPosted: Thu Nov 21, 2013 8:26 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Dec 04, 2012 3:58 pm
Posts: 124
First name: James
Last Name: Tonguet
City: Duluth
State: Ga
Zip/Postal Code: 30096
Country: USA
Focus: Build
Status: Amateur
I like this a lot , good to see people stretchin out the creativity
Top
 Profile  
 
Kent Wilkinson
PostPosted: Wed Feb 12, 2014 9:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
I'm back on this build. My first neck. Wasn't as bad as I thought.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
dzsmith
PostPosted: Thu Feb 13, 2014 1:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Looking good, Kent!
What tools did you use?
Dan

_________________
wah
Wah-wah-wah-wah
Wah
Top
 Profile  
 
Kent Wilkinson
PostPosted: Thu Feb 13, 2014 3:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
dzsmith wrote:
Looking good, Kent!
What tools did you use?
Dan


I used a wood rasp to cut the profile at the nut and heal. Then a old antique spoke shaver that I found for $10.00. I clamped the heel to the work bench and drawled it towards the head stock. then smoothed it with a orbatle sander. I need to smooth it a little more. and work the transition at the heel and head stock a little bit more. But am very happy with it so far. I didn't think I was capable of making a neck. I was planning on using a cheap neck I stripped off another guitar. I will post some more pictures of what i do today later.
Top
 Profile  
 
SJBikesaws
PostPosted: Thu Feb 20, 2014 2:50 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 04, 2014 10:49 am
Posts: 60
First name: sean
State: nm
Zip/Postal Code: 88349
Country: us
Focus: Build
Status: Amateur
This thing is just fricken coooool, watch out for splinters though!

_________________
Whatever you do DON'T confuse me as an EXPERT, or MASTER, just a self learned trial and error guy. I had to build a dozen guitar before I found out what a "Luthier" even was (????)


These users thanked the author SJBikesaws for the post: Kent Wilkinson (Sun Feb 23, 2014 9:35 pm)
Top
 Profile  
 
alan stassforth
PostPosted: Sun Feb 23, 2014 9:27 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Really nice, Kent!
Maybe don't put finish on the top?
Alan


These users thanked the author alan stassforth for the post: Kent Wilkinson (Sun Feb 23, 2014 9:35 pm)
Top
 Profile  
 
Kent Wilkinson
PostPosted: Mon Nov 09, 2015 7:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
Back on my bench. Decided to go a different direction on the neck. Flamed ash.


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
dzsmith
PostPosted: Mon Nov 09, 2015 8:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Man, you need a tool box for xmas!

_________________
wah
Wah-wah-wah-wah
Wah


These users thanked the author dzsmith for the post: Shaw (Tue Nov 17, 2015 9:41 pm)
Top
 Profile  
 
Kent Wilkinson
PostPosted: Mon Nov 09, 2015 8:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
dzsmith wrote:
Man, you need a tool box for xmas!


I have several. Just bad about putting stuff back.


These users thanked the author Kent Wilkinson for the post: Shaw (Tue Nov 17, 2015 9:41 pm)
Top
 Profile  
 
alan stassforth
PostPosted: Thu Nov 12, 2015 7:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
Kent Wilkinson wrote:
dzsmith wrote:
Man, you need a tool box for xmas!


I have several. Just bad about putting stuff back.

Me toooo!!!!
I am trying to get better about that.
Git is coming out swimmingly nice!
A
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 27 posts ]  Go to page 1, 2  Next

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com