Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 05, 2024 2:56 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Nov 04, 2014 11:06 am 
Offline
Walnut
Walnut

Joined: Wed Jan 29, 2014 8:51 am
Posts: 18
First name: Mark
City: Northborough
State: MA
Zip/Postal Code: 01532
Country: United States
Focus: Build
Status: Amateur
So I've been touching up my guitars lately and was starting to change this strap peg on my Bedell orchestra because it was chipped. I wrapped it in tape and went at it lightly with a pair of longnose and it started crunching and now looks really chipped, so I thought I should stop and ask.

I expected this to just be a threaded pin, but maybe it isn't?

Image

I'm worried that there's something more sinister here than just a threaded peg. Should I just brute-force it and break off the remnants of the button and and use heat (soldering iron) on the internal peg part? It also looks like the shoulder of the peg extends into the side wood of the guitar.

Before I screw up a perfectly good guitar that plays like a dream, I need some advice. Then I can screw it up.

thanks - Mark


Top
 Profile  
 
PostPosted: Tue Nov 04, 2014 11:36 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 992
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
I've never seen a threaded end pin. They're usually tapered, but often end up being glued in place. If your's didn't budge with the pliers, I wouldn't break it off. Rather I'd protect the finish with masking tape, cut the outside portion off with a Japanese flush cut saw, then drill out the bulk of the pin with an undersized brad-point drill. Finish by reaming out the remainder in preparation to receive a new pin. Of course, you may not have a flush cut saw, brad point drill or reamer, in which case you'll need to improvise.


Top
 Profile  
 
PostPosted: Tue Nov 04, 2014 3:34 pm 
Offline
Walnut
Walnut

Joined: Wed Jan 29, 2014 8:51 am
Posts: 18
First name: Mark
City: Northborough
State: MA
Zip/Postal Code: 01532
Country: United States
Focus: Build
Status: Amateur
Thanks for the reply Tim

I had thought that the dark spot in the middle was a steel shaft but I guess not. I took the point of my knife and was able to scratch it, so I guess I'll just cut the thing off. I don't have a Japanese saw but I do have an exacto-like razor saw that should do the job.

Thanks - Mark


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com