***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 29, 2024 3:51 am


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
herry tze
 Post subject: 20th Fret width
PostPosted: Sun Nov 16, 2014 10:41 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 14, 2010 10:50 am
Posts: 361
First name: herry
Last Name: trismono
City: malang
State: east java
Zip/Postal Code: 65142
Country: Indonesia
Focus: Build
Status: Amateur
Hi, hello, I need help about my 20th fret width
I'm building 34" bass with Precision Bass pickup neck through body, 80%done, but, when I measured nut width 42mm and oops_sign 20th fret width just 52mm (heel) idunno duh
What you think? about 20th fret width just 52mm, is that too narrow? what should I do?
I need your suggestion, thank you so much
herry tze [uncle]
Top
 Profile  
 
JimO
 Post subject: Re: 20th Fret width
PostPosted: Sun Nov 16, 2014 9:54 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Sep 16, 2009 9:54 pm
Posts: 235
First name: Jim
Last Name: Outman
City: LaGrange
State: GA
Zip/Postal Code: 30240
Country: USA
Focus: Build
Status: Amateur
Have you glued the neck to the wings yet? You're in better shape than I was on my last bass. Messed up with a router and had to cut out the wings and cut off the FB to get the truss rod out. Made a new neck and did it right the second time. Learned to fasten down a neck template a little better, LOL.

You might split it down the middle and add a 10+mm accent strip. Purpleheart looks cool in a maple neck. Or walnut, mahogany, etc. You will probably have to add a bit more after you get thru sanding, joining, etc.

Neck cut out.
Image

Finishing with new neck.
Image


These users thanked the author JimO for the post: herry tze (Mon Nov 17, 2014 2:27 am)
Top
 Profile  
 
herry tze
 Post subject: Re: 20th Fret width
PostPosted: Mon Nov 17, 2014 2:32 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Aug 14, 2010 10:50 am
Posts: 361
First name: herry
Last Name: trismono
City: malang
State: east java
Zip/Postal Code: 65142
Country: Indonesia
Focus: Build
Status: Amateur
JimO wrote:
Have you glued the neck to the wings yet? You're in better shape than I was on my last bass. Messed up with a router and had to cut out the wings and cut off the FB to get the truss rod out. Made a new neck and did it right the second time. Learned to fasten down a neck template a little better, LOL.

You might split it down the middle and add a 10+mm accent strip. Purpleheart looks cool in a maple neck. Or walnut, mahogany, etc. You will probably have to add a bit more after you get thru sanding, joining, etc.

Neck cut out.
Image

Finishing with new neck.
Image


Yes Jim, I ve done glued the neck to the wings. And problema for me the body semi hollow and I ve laminated the back and top too. oops_sign duh
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com