***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 6:55 pm


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
Puresoundguitar
 Post subject: Machining thin wood
PostPosted: Tue Mar 03, 2015 9:04 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Mon Mar 16, 2009 10:56 am
Posts: 53
First name: Daniel
Last Name: Henriks Madureira
Country: Close to the great white north
Focus: Build
Status: Professional
Hi everyone,

Quick question:

How do you machine, say... a headstock veneer?

Let's say I have a part that's 1/8inch thick and I want to do a 0.080 in pocket for some inlays... No vacuum available.

Aside double sided tape...any ideas?

Mind you that it's wood...if it was plastic I could glue it to a sacrificial plate, and then boil the whole thing to remove the small pieces...

_________________
CNC is a tool, not cheating :)
Top
 Profile  
 
Pmaj7
 Post subject: Re: Machining thin wood
PostPosted: Tue Mar 03, 2015 9:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Oh cnc. Got it!

_________________
Pat


Last edited by Pmaj7 on Wed Mar 04, 2015 10:21 pm, edited 1 time in total.

Top
 Profile  
 
Andy Birko
 Post subject: Re: Machining thin wood
PostPosted: Wed Mar 04, 2015 11:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Vacuum

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Don Williams
 Post subject: Re: Machining thin wood
PostPosted: Wed Mar 04, 2015 12:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
You've eliminated the two best options. Either use vacuum or double-sided tape. I agree with Andy though. Tape is problematic.
The only other choice is using locators and clamping, but you have to clamp as close to the pocket as possible. Just get a vacuum pump and make a fixture.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."
Top
 Profile  
 
Jim Watts
 Post subject: Re: Machining thin wood
PostPosted: Wed Mar 04, 2015 1:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2969
Location: United States
You could make a full face clamp with the pocketed area cut out of it. You'd have to index it into the proper position with locating pins. That is assuming the pocketed area is not some large percentage of of the face.

_________________
Jim Watts
http://jameswattsguitars.com
Top
 Profile  
 
Ken McKay
 Post subject: Machining thin wood
PostPosted: Wed Mar 04, 2015 7:00 pm 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
Attachment:
ImageUploadedByTapatalk1425513501.468809.jpg


Image

Attachment:
ImageUploadedByTapatalk1425513541.435975.jpg

Dan I think tape is the best
Get a long spatula to remove it
It's no problem if you're really careful.
And I just use the shelving board from Home Depot with the white melamine cover it's extremely flat takes tape very well




Sent from my iPhone using Tapatalk
Ken


You do not have the required permissions to view the files attached to this post.

_________________
Ken
Top
 Profile  
 
Kevin Waldron
 Post subject: Re: Machining thin wood
PostPosted: Wed Mar 04, 2015 7:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Thu Mar 19, 2009 10:16 pm
Posts: 190
Location: Bell Buckle, TN.
First name: kevin
Last Name: waldron
City: Bell Buckle
State: TN
Zip/Postal Code: 37020
Country: USA
Focus: Build
Status: Professional
Sacrifice board, hide glue, newspaper, hide glue, part/part's...... use Clothes Iron or use Micro-wave on defrost to release.

Blessings,

Kevin
Top
 Profile  
 
Puresoundguitar
 Post subject: Re: Machining thin wood
PostPosted: Wed Mar 04, 2015 8:54 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Mon Mar 16, 2009 10:56 am
Posts: 53
First name: Daniel
Last Name: Henriks Madureira
Country: Close to the great white north
Focus: Build
Status: Professional
Thanks for your replies everyone.

Definitely vacuum is on my bucket list, but for a one-off part it's kind of overkill for me at the moment. I'm actually in the process of designing a few different vacuum fixtures for multiple applications.

I think i'm going to try two options... Ken's suggestion, and Kevin. Didn't thought about the shelving board, I have a few off cuts here :)

I also like the newspaper trick.

I'll post a couple of pics once I machine the part.

Thanks guys!

_________________
CNC is a tool, not cheating :)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com