Official Luthiers Forum! • View topic

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours

New Tele build

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Kent Wilkinson

Post subject: New Tele build

Posted: Sun Nov 01, 2015 10:34 pm

Contributing Member

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build

started it 3 days ago. I'm very excited about this one. Mahogany body. Flamed maple top. Flamed ash neck. Walnut fret board.

You do not have the required permissions to view the files attached to this post.

Top

Kent Wilkinson

Post subject: Re: New Tele build

Posted: Sun Nov 01, 2015 10:47 pm

Contributing Member

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build

A few more pictures.

You do not have the required permissions to view the files attached to this post.

Top

Sandywood

Post subject: Re: New Tele build

Posted: Mon Nov 02, 2015 9:24 am

Cocobolo

Joined: Fri Jul 01, 2011 9:17 am
Posts: 381
First name: Michael
State: AR
Country: USA
Focus: Build
Status: Amateur

Removed.

Last edited by Sandywood on Fri Nov 06, 2015 7:49 am, edited 1 time in total.

These users thanked the author Sandywood for the post (total 2): Kent Wilkinson (Thu Nov 05, 2015 10:39 pm) • cablepuller1 (Mon Nov 02, 2015 5:09 pm)

Top

sdsollod

Post subject: Re: New Tele build

Posted: Mon Nov 02, 2015 8:35 pm

Koa

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur

Nice! I like that neck...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com

Top

Haans

Post subject: Re: New Tele build

Posted: Tue Nov 03, 2015 7:37 am

Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081

Good start Kent.
Keep us posted on your build. Happy to see it is your work and not some "kit".

Top

Kent Wilkinson

Post subject: Re: New Tele build

Posted: Thu Nov 05, 2015 10:40 pm

Contributing Member

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build

Sandywood wrote:

Awww...the excitement of a new build. Nothing else like it.

An Ash neck got my attention. Maybe nothing new except under my rock. I don't get out much.

Looking forward to seeing more of it and looks like a great start.

I've made quite a few of them and thought I'd share the one I built for myself.
I wound the P-90's and went with a blender rather than a switch.
I screwed up sizing the tuner holes- for the http://www.schaller-electronic.com/hp514510/Schaller-introduces-Da-Vinci.htmso a couple aren't as smooth as they should be...(drill press bad- block under head got chips under it while drilling so a couple of holes were a little slanted)..a set sure worked out good on a different build...I think they look cool too. Over priced though.

I did remove some body wood but it still turned out heavy...a little over 9lbs.

Top

Kent Wilkinson

Post subject: Re: New Tele build

Posted: Thu Nov 05, 2015 10:45 pm

Contributing Member

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build

A little more.

You do not have the required permissions to view the files attached to this post.

Top

dzsmith

Post subject: Re: New Tele build

Posted: Sat Nov 07, 2015 9:18 pm

Contributing Member

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur

Looking great Kent!
If you will be spraying nitro lacquer, apply a couple of coats of shellac as the sealer.
I just tried this, and man, it really makes the figure pop under the lacquer!
I used wood dust and shellac as a grain filler on the African Mahogany, it worked very well.
I'll be using shellac under nitro for all new builds.
I bought the Zinsser dewaxed sealer.

I see you will be installing a pick guard.
I don't like them, so I expect something really cool that is worth covering the Maple top!
I saw a pick guard a feller made from a vinyl LP. It was cooler than most things.

I'm trying to finish two Teles by xmas, but the weather has not been spray-friendly.
I look forward to seeing more pics.
Good work!
Dan

_________________
wah
Wah-wah-wah-wah
Wah

Top

alan stassforth

Post subject: Re: New Tele build

Posted: Thu Nov 12, 2015 7:45 pm

Brazilian Rosewood

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur

Yer getting me wanting to start building again!
A

Top

Page 1 of 1

[ 9 posts ]

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours

Who is online

Users browsing this forum: cip123 and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: