Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 10:16 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 110 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
PostPosted: Wed Mar 23, 2016 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
In response to the interest shown in the other thread, Birkonium is teaming up with Ann Arbor guitars to produce an Ultimate Fretting Caul Set. This will be a 24 piece brass fretting caul set designed to fit the Stew-Mac fretting press systems. The sizes offered have been determined by Dave Collins through over a decade of experience using the first generation of these cauls. Dave will be chiming in to describe his selection process once he frees up this afternoon.

I've started doing the research on the production costs etc. and here's what I've figured out so far.

* Shooting for under $200 price tag for this initial group buy
* The more people sign up, the better the pricing will be
* Will certainly be north of $200 if I decide to make these afterward
* Engraved or stamped size on each caul
* CNC machined of course!

What I need from you guys now is a a commitment to who wants a set of these. The goal is to have these manufactured by the next Ann Arbor Guitars fretting class on April 30's so please respond to this thread by April 13th so we have enough time to get these manufactured by then.

So, if you'd like to purchase a set, please respond to this thread.
Once you've responded to this thread, I'll PM you for e-mail and shipping info and send a $50 paypal invoice for a deposit.
Once we know the final price and the cauls are manufactured, I'll send a paypal invoice for the balance + shipping charges.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com



These users thanked the author Andy Birko for the post (total 2): dberkowitz (Mon Apr 11, 2016 7:38 am) • Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 10:23 am 
Offline
Mahogany
Mahogany

Joined: Fri Feb 13, 2015 7:59 pm
Posts: 46
Location: LI NY
First name: Keith
Last Name: Lally
City: Brookhaven
State: NY
Zip/Postal Code: 11719
Country: United States
Focus: Build
Status: Amateur
I'd like a set Andy. Thanks for taking this on.

_________________
- Keith



These users thanked the author krl for the post: Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 11:18 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3594
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
I would like a set.

Brad Combs

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post: Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 11:33 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 15, 2009 5:10 pm
Posts: 148
Location: Clayton, NY
First name: Dan
Last Name: Miller
City: Cape Vincent
State: NY
Zip/Postal Code: 13618
Country: United States
Focus: Build
Status: Amateur
Count me in.

Dan



These users thanked the author Dan Miller for the post: Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 11:38 am 
Offline
Contributing Member
Contributing Member

Joined: Fri Dec 23, 2011 10:17 am
Posts: 292
First name: Linus
City: Brooklyn
State: NY
Zip/Postal Code: 11215
Country: USA
Focus: Build
Status: Amateur
Count me in.
Linus



These users thanked the author Linus for the post: Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 11:44 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Andy I just PMed everyone in the original thread who wanted to be informed if you decided to make these very cool caul sets available again. So expect some traffic in this thread!

Thanks again for doing this Andy - much appreciated!

The new Ultimate set has been improved and as Andy said Dave will be along at some point to talk about his selection of what sizes are most useful. Dave and I have been using the original sets that have not been available for nearly a decade now for about 10 years. Along the way we learned what sizes are most useful and what sizes rarely if ever get used and what graduations would be most helpful too.

The new Ultimate set reflects this research and a decade of real-world, working pro use and should serve us all much better.

For working pros we use ours near daily and have done hundreds of refrets with our sets. Great tools are important!

For builders these sets are the ticket to compound radius boards and fret planes. The sets include every size that one would need to do very cool compound radius fret jobs. The benefit of compound radius beyond folks are asking for them these days after trying them is that slightly lower action is possible with a compound radius over a static radius.

Not the entire world likes low action but in my world about 90% of it does...:)

I'm just pleased as punch that these are going to be available again too - Many, many thanks Andy!


Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 11:49 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 784
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
I would like a set. And a big thumbs up to Ann Arbor Guitars And Andy Birko you guys rock.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/



These users thanked the author dofthesea for the post: Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 11:57 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
I'm in



These users thanked the author Clinchriver for the post: Hesh (Wed Mar 23, 2016 1:33 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 12:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Mar 24, 2006 12:42 pm
Posts: 2360
Location: Windsor Ontario Canada
First name: Fred
Last Name: Tellier
City: Windsor
State: Ontario
Zip/Postal Code: N8T2C6
Country: Canada
Focus: Build
Status: Amateur
Count me in for a set Andy.

Fred

_________________
Fred Tellier
http://www.fetellierguitars.com
Facebook page http://www.facebook.com/pages/FE-Tellier-Guitars/163451547003866



These users thanked the author Fred Tellier for the post: Hesh (Wed Mar 23, 2016 1:34 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 12:05 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 23, 2008 8:05 pm
Posts: 1567
Location: San Jose, CA
First name: Dave
Last Name: Fifield
City: San Jose
State: CA
Zip/Postal Code: 95124
Country: USA
Focus: Build
Status: Amateur
Thanks for the alert Hesh [:Y:]

I'm in....thanks for taking this on Andy!

Dave F.

_________________
Cambrian Guitars

"There goes Mister Tic-Tac out the back with some bric-brac from the knick-knack rack"



These users thanked the author Dave Fifield for the post: Hesh (Wed Mar 23, 2016 1:34 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 12:10 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 11, 2008 9:13 pm
Posts: 834
Location: Durango CO
First name: Dave
Last Name: Farmer
City: Durango
State: CO
I'm in.
Thanks to Andy and the Ann Arbor boys. Very generous.

Can never have too many!

Attachment:
IMG_4266 - Copy.JPG


You do not have the required permissions to view the files attached to this post.



These users thanked the author david farmer for the post (total 2): David Collins (Wed Mar 23, 2016 10:04 pm) • Hesh (Wed Mar 23, 2016 1:34 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 12:43 pm 
Offline
Contributing Member
Contributing Member

Joined: Thu Sep 08, 2005 12:49 am
Posts: 141
Location: United States
First name: John
Last Name: Cavanaugh
City: Saint Paul
State: MN
Focus: Build
Status: Amateur
It was good to meet you at the fretting workshop in Ann Arbor in November, Andy. I'll sign up for a set. Thanks.

_________________
John Cavanaugh
Saint Paul, MN
"What could possibly go wrong?"



These users thanked the author John Cavanaugh for the post: Hesh (Wed Mar 23, 2016 1:34 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 1:38 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
David my friend you take the best pictures and I have been noticing this for a while now. Your pictures tell a story and of course all the technical aspects are spot on as well. Very cool! [:Y:]

In this one excellent photo there are likely 15 topics for discussion threads illustrated! Good going!

david farmer wrote:
I'm in.
Thanks to Andy and the Ann Arbor boys. Very generous.

Can never have too many!

Attachment:
IMG_4266 - Copy.JPG



These users thanked the author Hesh for the post: david farmer (Wed Mar 23, 2016 6:50 pm)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 2:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7375
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Andy, I'm in.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Hesh (Thu Mar 24, 2016 5:21 am)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 7:17 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1483
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
I'll take a set..

Thanks



These users thanked the author Michaeldc for the post: Hesh (Thu Mar 24, 2016 5:22 am)
Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 9:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Dec 03, 2005 10:04 am
Posts: 2060
Alright, long day, but finally found the chance to sit and write for a minute. Here's a breakdown of my goals for what I would consider an ideal caul set.

The traditional approach is of course to say if you are fretting a 12" radius board, use a 12" radius caul. My experience however, places this practice to be one of blind faith in numbers and specs, with shortcomings easily overlooked for convenience. By and large, for the majority of fret work seen in real life, these specs rarely end up so perfect. From the thickness of the wire, to the glueing, leveling, and sanding of the board, it is quite rare for a 12" radius to be a true 12.0" radius, even when it comes time to install frets on new construction.

For anyone who does refrets or uses compound radius boards, the schism between spec and reality become even more obvious.

So my approach is a preference to abandon the false comfort of tidy round spec numbers, and instead shift toward a series of narrow increments. This means the radii these will be cut and marked as will not be a nice neat series of 10, 12, 14, 16, etc. Instead I would prefer a series of consistent increments spanning whatever range may be typically encountered.

I write this long preface because at first glance the odd numbers they will be spaced to could no doubt be received as discomforting when they do not line up with the precise (but rarely real) numbers we like to list as specs. In practice however, I find the neat round numbers to only be of false comfort, and when pressed to the board don't necessarily provide the best palette of choices to work with.

Instead I've come up with a series ranging from around 6" to 24", with the focus on incremental change in the sagitta, or the height at the center of the radius. The geometry gets a bit complicated, but the current layout is arranged to set increments ranging from approximately .002" in the shallower range (slightly less when viewed from perspective toward the nut, slightly more as it widens toward the extension), up toward .0025"-.003" as you approach the shallowest radius of 6".

The end result will be that if you find yourself pressing against any radius not perfectly matching the caul (which in reality pretty much amounts to every guitar or caul set you'll ever work with), you will use the next smaller radius. The difference in the center is then automatically compensated for by the slight bit of slop that exists in just about every pressing system. At the widest gaps between radii, the caul need tilt no more than 1.5° max to press the center fully down that last ~.002" once the ends are seated.

Those who have used the StewMac presses certainly witness this on a regular basis. When you are 10" caul to press in to an 11" region on a compound board, the head tilts slightly to better conform, and you can press quite neatly with this method.

The issue I've had with our current arrays of cauls is that the increments don't provide the smoothest transition between the neat tidy whole numbers they come in. After years of using the StewMac and Watkins sets, as well as a few customized cauls, I find there to be a number of gaps which are too large, and push the "auto-regulating" limits of sight tilt in the caul holder or clamp. I actually busted the tip on one of our older Jaws clamps from trying to push the tilt too far on an old D'Angelico that had a 6-7ish radius.

So, after years of using existing sets of cauls, and a number of custom ones, this is going to be the arrangement I've always wanted, set not to a series of comfortingly round numbers, but rather laid out in a more comprehensive and practical spread from one end to the next, without all the gaps which have frustrated me in the past.

Can't wait to finally have a full set!

_________________
Eschew obfuscation, espouse elucidation.



These users thanked the author David Collins for the post (total 5): Pmaj7 (Tue Aug 31, 2021 9:26 pm) • JHerrick (Tue Mar 24, 2020 9:50 am) • Clinchriver (Thu Mar 24, 2016 6:58 am) • SteveSmith (Thu Mar 24, 2016 5:59 am) • Hesh (Thu Mar 24, 2016 5:22 am)
Top
 Profile  
 
PostPosted: Thu Mar 24, 2016 8:51 am 
Offline
Walnut
Walnut

Joined: Mon Apr 25, 2011 12:44 pm
Posts: 36
First name: Joel
Last Name: Barbeau
City: Montreal
State: Quebec
Country: Canada
Sign me up for one set, Andy.

_________________
Not much but at least it exists : http://jbluthier.com/


Top
 Profile  
 
PostPosted: Thu Mar 24, 2016 1:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Ok, I think I've sent an e-mail to everyone who's on the list so far. If you haven't received an e-mail from me (not PM) please send me a PM here on the forum.

I'll probably wait a week or so and then send everyone who's signed up the deposit invoice so that I do them all at once and nothing slips through the cracks.

Best,

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com


Top
 Profile  
 
PostPosted: Thu Mar 24, 2016 5:14 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 11, 2008 9:13 pm
Posts: 834
Location: Durango CO
First name: Dave
Last Name: Farmer
City: Durango
State: CO
I was going to just suggest some smaller nominal increments for the tighter radiuses.
True to form David, you've taken it to a whole new level! Thanks.
Now I'll just tighten my grip on you and Andy's Capes!


Top
 Profile  
 
PostPosted: Thu Mar 24, 2016 7:06 pm 
Offline
Walnut
Walnut

Joined: Tue Feb 19, 2013 12:32 am
Posts: 1
First name: David
Last Name: Maxwell
City: Kent
State: Ohio
Zip/Postal Code: 44240
Country: USA
Focus: Build
Status: Amateur
I'd like a set Andy. Thanks to all for putting this together...


Top
 Profile  
 
PostPosted: Thu Mar 24, 2016 10:40 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Dec 03, 2005 10:04 am
Posts: 2060
I was going through the numbers again tonight, and realized an important factor I had left out earlier. Of course it will vary with your region and prices, but at our shop, if this set ends up in the $200 range, it will take about 40% of one refret to cover the cost.

Factor in the savings in opportunity costs from the next time I won't have to mess with bending and customizing other cauls to try and fill in the gaps, and it would probably end up a wash for us. I wish I had this set for one particular refret I had to do a few weeks back - would have saved an hour or so in wasted time on that job alone.

_________________
Eschew obfuscation, espouse elucidation.



These users thanked the author David Collins for the post (total 2): Pmaj7 (Tue Aug 31, 2021 9:29 pm) • Clinchriver (Fri Mar 25, 2016 7:00 am)
Top
 Profile  
 
PostPosted: Fri Mar 25, 2016 2:49 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Sep 18, 2012 1:17 pm
Posts: 128
First name: Dave
Last Name: Baley
City: Goleta
State: California
Zip/Postal Code: 93117
Country: USA
Focus: Repair
I'll take a set thanks for making this possible.
My only concern is the issues raised in the original thread about the poor quality of the current Jaws2. Not sure yet what I will do about that.
Dave


Top
 Profile  
 
PostPosted: Fri Mar 25, 2016 5:01 pm 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 985
First name: Josh
Focus: Build
Status: Amateur
I'll take a set as well. I assume shipping to international locations won't be problem?


Top
 Profile  
 
PostPosted: Fri Mar 25, 2016 5:23 pm 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 985
First name: Josh
Focus: Build
Status: Amateur
Dave Baley wrote:
I'll take a set thanks for making this possible.
My only concern is the issues raised in the original thread about the poor quality of the current Jaws2. Not sure yet what I will do about that.
Dave


Good point. Can anyone advise just how good/bad/ugly this current iteration of the Jaws II clamp is? Are we talking not fit-for-purpose at all/modification definitely required, or is it just a little rickety?

Purely from looking at pictures, it looks like a quality clamp could be drilled and tapped to take the two 'stabilizing' thumbscrews, but unsure about how difficult it would be to get the pressing caul itself off the Stewmac clamp and onto a new clamp. Also, unsure if the provided wooden neck caul blocks will fit on other common F-clamp heads....

Perhaps someone who physically owns the current Jaws II be willing to take a close look at it and provide some details on whether these kinds of modifications look possible?


Top
 Profile  
 
PostPosted: Fri Mar 25, 2016 8:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
I was one of the folks complaining about the Jaws II.

I think my main problems have been with the cauls, trying to fully set a fret with an ill-fitting caul.

Comparing the clamps is "interesting", the thread pitch on the SM clamp is finer so it should develop more force but it seem sticky - strictly subjective observation.

Anyhow, I'd like the get a set of cauls too.

Kevin Looker

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 110 posts ]  Go to page 1, 2, 3, 4, 5  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com