Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Taylor Kerfing Clamps

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Sylvan

Post subject:

Posted: Sun Mar 12, 2006 6:57 am

Cocobolo

Joined: Sun Jan 09, 2005 8:49 am
Posts: 389

I am cleaning out my shop and found that I have a complete set of Taylor
aluminum kerfing clamps. By my count there are 31 small ones and 98 large
ones (give or take one or two). I bought them several years ago direct from
Taylor and found that I just do not use them anymore. Best offer takes them!
E-mail me at sylvan@sylvanwells.com!

_________________
Sylvan
http://www.wellsguitars.com

Top

Jim Watts

Post subject:

Posted: Sun Mar 12, 2006 7:42 am

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2989
Location: United States

So what do you use these days?

_________________
Jim Watts
http://jameswattsguitars.com

Top

Sylvan

Post subject:

Posted: Sun Mar 12, 2006 9:02 am

Cocobolo

Joined: Sun Jan 09, 2005 8:49 am
Posts: 389

Thanks everyone. The clamps are sold!!!! JIm -
I made up my own set from clothespins and surgical tubing.Sylvan38788.7103472222

_________________
Sylvan
http://www.wellsguitars.com

Top

Brock Poling

Post subject:

Posted: Sun Mar 12, 2006 10:01 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

Sylvan... didn't you like these? I have looked at them several times. I always think they look great, but just couldn't bring myself to part with the cash.... I am curious what you thought of them.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

Scott Thompson

Post subject:

Posted: Sun Mar 12, 2006 10:05 am

Cocobolo

Joined: Mon Jan 31, 2005 11:53 am
Posts: 320
Location: United States
First name: Scott
Last Name: Thompson

[QUOTE=Brock Poling]
Sylvan... didn't you like these? I have looked at them several times. I always think they look great, but just couldn't bring myself to part with the cash.... I am curious what you thought of them.[/QUOTE]

Brock, I've thought the same. I have wondered what it would cost to have someone with a CNC make up a big batch of them.

_________________
Scott Thompson
Port Townsend,WA

"In a perfect world we'd all sing in tune
But this is reality so give me some room"
-Billy Bragg

Top

Brock Poling

Post subject:

Posted: Sun Mar 12, 2006 10:07 am

Old Growth Brazilian Rosewood

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States

Some one like... John Watkins? hmmm.... I wonder.....

Good thinking.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com

Top

John Mayes

Post subject:

Posted: Sun Mar 12, 2006 10:21 am

Brazilian Rosewood

Joined: Sat Jan 08, 2005 3:37 am
Posts: 2670
Location: United States
First name: John
Last Name: Mayes
City: Norman
State: OK
Focus: Build
Status: Professional

I have some and they are groovy. The bad thing is if your not using the
same size/style kerfing as Taylor then it tends to put pressure on the
wide part of the kerfing rather than the narrow/edge of the kerfing and
that can lead to unsightly gaps.

_________________
John Mayes
http://www.mayesluthier.com

Top

Page 1 of 1

[ 7 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: