***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 6:39 am


Board index » Instrument Restoration and Repair

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
CFJH
PostPosted: Fri May 12, 2017 8:45 pm 
Offline
Walnut
Walnut

Joined: Fri May 12, 2017 5:45 pm
Posts: 5
First name: Chris
Last Name: Hauser
Focus: Repair
Status: Amateur
Anyone know how to remove this style of pickup?
It appears there is a pocket milled into the sound board that this nickel cover is sitting in.
I didn't see any screws under the pick guard.
Thanks

Image
Top
 Profile  
 
B. Howard
PostPosted: Sat May 13, 2017 7:13 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Is it attached to the pick guard?

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/
Top
 Profile  
 
SteveSmith
PostPosted: Sat May 13, 2017 7:46 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7379
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Looks like the pickgusrd is held on with screws. Can't tell if pickguard is raised or flush. If flush, have you removed it to see if there is some kind of access underneath?

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
CFJH
PostPosted: Sat May 13, 2017 8:22 am 
Offline
Walnut
Walnut

Joined: Fri May 12, 2017 5:45 pm
Posts: 5
First name: Chris
Last Name: Hauser
Focus: Repair
Status: Amateur
Sorry if I wasn't clear, I took the pick guard off to get a better look. There was nothing under there. The cover is not held in from the top by any screws you can see.
Top
 Profile  
 
sdsollod
PostPosted: Sat May 13, 2017 9:46 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Man, that is an old guitar! laughing6-hehe wow7-eyes :lol: Could it have been permanently mounted during construction?

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com
Top
 Profile  
 
CFJH
PostPosted: Sat May 13, 2017 10:40 am 
Offline
Walnut
Walnut

Joined: Fri May 12, 2017 5:45 pm
Posts: 5
First name: Chris
Last Name: Hauser
Focus: Repair
Status: Amateur
1952 - 1955 from what I've read. These are the only series with a single pickup at the bridge.
They were built by Kay and re branded for Sears.
If it was glued in I'd not want to heat for fear of disturbing any potting material on the pickup, I know some windings used wax.

Image
Top
 Profile  
 
CFJH
PostPosted: Thu May 18, 2017 11:27 am 
Offline
Walnut
Walnut

Joined: Fri May 12, 2017 5:45 pm
Posts: 5
First name: Chris
Last Name: Hauser
Focus: Repair
Status: Amateur
Here's an update, I figured a way to take a peak at the underside of the pickup.
An iPhone will fit through the f-hole, just needed to a way to get it out easily.
I still had the high E string on my desk, some gaffers tape to attach and I'm ready.

Image

I used an LED bar light

Image

Put that in the pickguard f-hole

Image

Here's the first photo before I lowered the phone all the way in. That's the light in the other f-hole. I was able to snap the picture from the outside of the body, the screen was long enough to hit the virtual button.

Image

My finger was not long enough to reach the screen, I used a touch screen pen with the rubber tip

Image

There's the iPhone under the pickup with the camera angle turned around

Image

Here's the picture from under the pickup, too close to focus properly. You can see the two wood screw tips bulging the brace wood. So now I know that the pickup chassis is screwed down, question is, how do I remove the nickle plated cover to access the screw heads? Any suggestions are welcome.

Image
Top
 Profile  
 
CFJH
PostPosted: Thu May 18, 2017 1:48 pm 
Offline
Walnut
Walnut

Joined: Fri May 12, 2017 5:45 pm
Posts: 5
First name: Chris
Last Name: Hauser
Focus: Repair
Status: Amateur
Just found this old capacitor between the volume and tone pots. I'll bet that one is tired. Most of the 30's & 40's tube radios I've restored had these, another item on my to do list.

Image
Top
 Profile  
 
profchris
PostPosted: Fri May 19, 2017 5:24 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Feb 09, 2012 4:10 pm
Posts: 279
First name: Chris
Last Name: Reed
City: Stowmarket
State: Suffolk
Zip/Postal Code: IP14 2EX
Country: UK
Focus: Build
Status: Amateur
Best guess is that the nickel cover is a friction fit. So I'd attempt gently to lever it off, possibly levering both sides simultaneously. Stop of course if there's no movement.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com