Official Luthiers Forum! • View topic - Aria Pro II TA-60

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours

Aria Pro II TA-60 - replacement bridge/ tailpiece ?

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

dpetrzelka

Post subject: Aria Pro II TA-60 - replacement bridge/ tailpiece ?

Posted: Mon Feb 26, 2018 2:34 pm

Contributing Member

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build

I'm fixing up an Aria Pro II TA-60 for a buddy, and he'd like to replace the bridge and tailpiece. Can anyone confirm what/ if any aftermarket tune-o-matic style hardware fit these? Gotoh, GoldenAge?

Tune-o-matic bridges are generally out out of my comfort zone / technical expertise, as I focus primarily on acoustics and Fender style builds and repair. I'm sure there are fitment issues I haven't even thought about yet.

Any advise greatly appreciated.

Top

B. Howard

Post subject: Re: Aria Pro II TA-60 - replacement bridge/ tailpiece ?

Posted: Tue Feb 27, 2018 8:07 am

Brazilian Rosewood

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional

To my knowledge they come in either metric or standard. Aria proII would be a metric guitar. Main difference is stud spacing, SAE is 2-29/32" (74-74.5mm) and Metric is 82MM according to manufacturers specs.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

Top

dpetrzelka

Post subject: Re: Aria Pro II TA-60 - replacement bridge/ tailpiece ?

Posted: Tue Feb 27, 2018 11:14 am

Contributing Member

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build

Thanks Brian.

Looking at my chicken-scratch notes here, I had 2.800" center to center on the bridge, and 3.155" center to center on the tailpiece. Which doesn't line up with either the standard SAE or Metric. I'll take more precise measurements, and see if there is an obvious answer.

Top

Page 1 of 1

[ 3 posts ]

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 21 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: