Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 10:47 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri Mar 16, 2018 3:29 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
Just a short story since this question gets asked alot.

I recently had a customer come in with a few guitars. I informed him that in order to make them playable they would require far more money than they are worth, all of them were Harmony and stella style 1960s/50s entry level ones.

He thanked me for my time and left, we had a good friendly conversation after we had discussed the numbers.

Calls me the next day and asks if I could look at one more guitar for him.

He brings in a nice tweed case, much nicer than the ones from the other day. Inside was a gorgeous early 1950s J45. And it needed every job in the book. Neck was projecting so low that a previous owner had decided to have the bridge shaved down to a little over 1/8" thick. The frets were non-existant. Bridge plate was worn so badly that the strings would stick when you'd remove them. Neck joint had been monkeyed with by a homegamer some years ago.

I give him a price (it was high) and he let me do the job. Guitar turned from a kitten into a jaguar once all was said and done.

Upon reception of his guitar he specifically said that he trusted my opinion because of the fact that I had turned down the previous jobs. And thus he felt comfortable enough to let me do some serious work on a much more valuable guitar.

All this to say that you should always be willing to turn jobs down, even if you CAN do them it does not mean that you SHOULD. If your customer trusts you enough to know that you know when to say no, they'll trust you even more when you say yes. I daresay that if you never turn down work then you're doing something wrong (at least in this business, ymmv).



These users thanked the author DanKirkland for the post (total 4): Jeffrey L. Suits (Mon Apr 30, 2018 12:10 pm) • Hesh (Sun Mar 18, 2018 11:47 pm) • Durero (Sat Mar 17, 2018 3:28 pm) • Clinchriver (Sat Mar 17, 2018 8:02 am)
Top
 Profile  
 
PostPosted: Fri Mar 16, 2018 6:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5825
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Preach it, brother.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Mon Mar 19, 2018 6:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
It's a worthwhile lesson... Trying to be all things to all people is a sure way to drive yourself to hating both the job and your customers..... People sometimes get so afraid of "leaving business on the table" that they forget that it's very bad business to lose money on jobs...

At the same time - those jobs you turn down often turn out to be somebody else's bread and butter work... For example - with old Harmony guitars - Baxendale guitars, Vintage Parlor Guitars and Antebellum Instruments come to mind... They do lots and lots of them - and are all set up for that kind of work....


Top
 Profile  
 
PostPosted: Wed Mar 21, 2018 2:49 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jul 13, 2006 6:17 am
Posts: 1937
Location: Evanston, IL
First name: Steve
Last Name: Courtright
Focus: Build
Status: Amateur
Great story - I had a boss who once gave me some simple, but clear advice: "If you ever wonder what to do, just do the right thing."

_________________
"Building guitars looks hard, but it's actually much harder than it looks." Tom Buck



These users thanked the author SteveCourtright for the post (total 2): DanKirkland (Fri Apr 06, 2018 10:34 am) • Bryan Bear (Wed Mar 21, 2018 3:35 pm)
Top
 Profile  
 
PostPosted: Wed Mar 21, 2018 3:37 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3293
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
SteveCourtright wrote:
Great story - I had a boss who once gave me some simple, but clear advice: "If you ever wonder what to do, just do the right thing."


That's great advice for many avenues of life. I have found that 90+% percent of the time, knowing what the right thing to do is, is the easy part; choosing to do it can be more difficult.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.



These users thanked the author Bryan Bear for the post: SteveCourtright (Wed Mar 21, 2018 4:08 pm)
Top
 Profile  
 
PostPosted: Wed Mar 21, 2018 5:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Great Story and good advice. Got any pics? I always love to see life skillfully breathed back into a an old instrument.


Top
 Profile  
 
PostPosted: Tue Mar 27, 2018 5:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5498
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Thanks for the post.
Been thinking to turn one down, Les Paul with bent forward bridge posts (for intonation correction) neck "set" too far back, (bridge too high) a poor fret job, loose inlay on FB and worn frets 1-7.
He just wants some fall-off sanded in the top frets.....
Seems unwilling (or unable) to pay for a full job, and I'm reluctant to do that.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Fri Apr 06, 2018 10:35 am 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
Colin North wrote:
Thanks for the post.
Been thinking to turn one down, Les Paul with bent forward bridge posts (for intonation correction) neck "set" too far back, (bridge too high) a poor fret job, loose inlay on FB and worn frets 1-7.
He just wants some fall-off sanded in the top frets.....
Seems unwilling (or unable) to pay for a full job, and I'm reluctant to do that.


Seems like a prime candidate to pass on.

I don't have photos of the guitar in question, I think this was less about the guitar and more about the lessons behind it.


Top
 Profile  
 
PostPosted: Tue Apr 10, 2018 9:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7380
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Being in East Tennessee a lot of people like to paint things UT orange. Had one guy wanted his dred refinished in UT orange. I quoted him a price that included the charge for a pro guitar refinisher, all shipping expenses, and a bit for my trouble. Needless to say he decided he didn't want an orange guitar that badly.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post (total 2): Clinchriver (Wed Apr 25, 2018 4:28 pm) • Jonny (Sun Apr 22, 2018 1:31 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com