Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 12:15 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Jan 07, 2019 1:39 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
I bought this weird "jaguarish" guitar kit online a while ago, and the switching is a little redundant, ridiculous, and not at all like an actual jaguar. So I'm wondering if anyone has any creative ideas about what to do with these three two way toggle switches.

The guitar has two humbuckers, (just normal wiring, not 4 wires) with a standard 3 way (telecaster) blade switch, and one volume and one tone. No problems here, I'd be fine leaving it that way. However it has also come with a rout on the top of the body and a metal plate with three 2 way switches. I think the wiring diagram that comes with the kit, makes these switches simply on/off one for each pickup and a master. Seems kind of unnecessary and dumb to me. Anyway I was gonna just leave them as dummy switches to give it that Fender offset vibe, but then I got to thinking there must be something else a person could do with these switches.

I was thinking of using one of the 2 way switches to choose between two circuits like on a jazzmaster, when its down it's just your typical switching with the 3 way blade switch and vol/tone, but when its up it routs it through the other 2 way switches, which operate as on/off switches for each pick up but have a capacitor wired into the on position so they also act as dark switches.

Any other ideas?


Top
 Profile  
 
PostPosted: Sat Jan 12, 2019 12:11 pm 
Offline
Walnut
Walnut

Joined: Mon Nov 12, 2018 6:59 pm
Posts: 16
First name: Tom
Last Name: Wolf
City: Morrison
State: Oklahoma
Zip/Postal Code: 73061
Country: US
Focus: Repair
Status: Amateur
I don't play gigs anymore, just do a lot of home recording..I put a mini-toggle switch
on all the parts casters I put together...use it for an on-off switch that I can flip while
I'm editing.I also usually remove the vol knob on strats and re-position it-it's always
in the way, for me....also I use a lot of the mini-toggles for pu selection-never cared
for the 4 way blade switch.That's just me, but seems like the strat could stand a new
design in it's controls...enjoy your wknd. amigo.


Top
 Profile  
 
PostPosted: Sun Jan 13, 2019 3:31 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
Tom Wolf wrote:
I don't play gigs anymore, just do a lot of home recording..I put a mini-toggle switch
on all the parts casters I put together...use it for an on-off switch that I can flip while
I'm editing.I also usually remove the vol knob on strats and re-position it-it's always
in the way, for me....also I use a lot of the mini-toggles for pu selection-never cared
for the 4 way blade switch.That's just me, but seems like the strat could stand a new
design in it's controls...enjoy your wknd. amigo.


That's awesome Tom. Thanks for the ideas. Its funny what we get used to. Every time I play with something that's not a strat I wish the volume knobs were in the right place. :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com