***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 29, 2024 1:52 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
dofthesea
 Post subject: Router Bit choices
PostPosted: Mon Jun 03, 2019 1:09 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 789
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Iv'e been using MLCS for router bits but they seem to be kind of on the cheaper end of the spectrum. What might be everyones preference for mid level to nicer router bits? Now that Ive upgraded to a JessEM Router table and lift I would like my router bits to last a bit longer.

Most of the bots I use are straight flute and pattern bits. fyi

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/
Top
 Profile  
 
Bri
 Post subject: Re: Router Bit choices
PostPosted: Mon Jun 03, 2019 3:31 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun May 19, 2013 10:22 am
Posts: 727
First name: Brian
Last Name: McDonald
City: Okanagan Centre
State: British Columbia
Zip/Postal Code: V4V2H6
Country: Canada
Focus: Build
Status: Amateur
CMT bits last the best for me. Routerbitworld has good prices and selection.

B

_________________
My memory is so good, sometimes I remember things that never happened.
Top
 Profile  
 
Woodie G
 Post subject: Re: Router Bit choices
PostPosted: Mon Jun 03, 2019 4:12 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1876
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Whiteside for most things, as they are well made and durable. We have a few CMT round-over bits and they have held up well. The Freud Diablo bits from Home Depot will do in a pinch, but the Whitesides seem to be about the same price through our suppliers and are better quality.

_________________
For the times they are a changin'

- Bob Dylan
Top
 Profile  
 
Clay S.
 Post subject: Re: Router Bit choices
PostPosted: Mon Jun 03, 2019 4:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5968
I have used Whiteside and Amana and have had good luck with them. They are not cheap but hold up well. I will buy cheaper bits for profiles I don't think I will use that often. I also use high speed steel bits which can be sharpened sharper than carbide and give a cleaner cut, but probably wouldn't interest you if you are looking for bits that - stay sharp - longer. I've heard estimates that carbide will retain usable sharpness 40 times as long as HSS.
Top
 Profile  
 
dofthesea
 Post subject: Re: Router Bit choices
PostPosted: Mon Jun 03, 2019 5:27 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 789
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Where is everyone finding the best prices for white side router bits? I use the router a lot so typically buy in bulk.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/
Top
 Profile  
 
Ernie Kleinman
 Post subject: Re: Router Bit choices
PostPosted: Tue Jun 04, 2019 6:17 am 
Offline
Koa
Koa

Joined: Sun Oct 28, 2018 3:40 pm
Posts: 500
First name: Ernest
Last Name: Kleinman
City: Guthrie
State: OK
Zip/Postal Code: 73044
Country: United States
Focus: Build
Status: Professional
Whiteside bits .I got mine from woodcraft. when they have a sale on them . Check their fliers. Also they give you a 10 percent discount on your birthday.Ask. I will also use cheap bits, from amazon or evil bay for seldom used jobs . e.g. 1/8 inch roundover bits
Top
 Profile  
 
SteveSmith
 Post subject: Re: Router Bit choices
PostPosted: Tue Jun 04, 2019 7:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7380
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Whiteside here too. Usually from Woodcraft because it's convenient for me.

_________________
Steve Smith
"Music is what feelings sound like"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot] and 88 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com