Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Mesquite Tone Wood

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Laidback1

Post subject: Mesquite Tone Wood

Posted: Mon Jan 24, 2022 12:16 am

Contributing Member

Joined: Sun Jul 15, 2012 2:19 pm
Posts: 56
First name: Mark
Last Name: Ballard
State: TX
Focus: Build
Status: Amateur

I have someone wanting me to build them a guitar with Mesquite Back & Sides.
Having a heck of a time findings supplier that carries it. Do any of y’all know of a source?

Thanks,
Mark

Top

Tim L

Post subject: Re: Mesquite Tone Wood

Posted: Mon Jan 24, 2022 11:08 am

Contributing Member

Joined: Tue Jan 29, 2008 11:14 am
Posts: 819
First name: Tim
Last Name: Lynch
City: Santa Cruz
Zip/Postal Code: 95060
Country: United States
Focus: Build
Status: Amateur

Gilmer occasionally sells Mesquite. Don't think I have ever seen any big enough to use for back/sides.
You could call them and ask.

These users thanked the author Tim L for the post: Laidback1 (Tue Jan 25, 2022 6:34 pm)

Top

wbergman

Post subject: Re: Mesquite Tone Wood

Posted: Mon Jan 24, 2022 12:33 pm

Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1577
Location: United States

Seeing that you are in Texas, there are some lumber yards in Texas that specialize in Mesquite. You might check with them for the wood, and see if they will mill it for you.

Top

Slim

Post subject: Re: Mesquite Tone Wood

Posted: Mon Jan 24, 2022 1:45 pm

Cocobolo

Joined: Sat Nov 06, 2021 5:37 am
Posts: 137
First name: John

I myself live in TX and see tons of mesquite & what I believe is juniper slabs at trades days and such that local mills bring. It’s usually high moisture content flat sawn because it’s easier that way and high yield. I always stop an look and once or twice found a a piece that was rift or quartered accidentally. They probably would cut whatever you want for the $ but then you still have the curing issue. I have never seen mesquite offered pre dimensioned as a set any place though.

Top

wbergman

Post subject: Re: Mesquite Tone Wood

Posted: Mon Jan 24, 2022 4:15 pm

Koa

Joined: Mon Dec 18, 2006 9:42 am
Posts: 1577
Location: United States

https://www.bing.com/search?q=mesquite+ ... 5380d455ba

This fellow in Texas makes guitars using mesquite. He gets it somewhere. It couldn't hurt to contact him.

Top

A.Hix

Post subject: Re: Mesquite Tone Wood

Posted: Mon Jan 24, 2022 4:56 pm

Contributing Member

Joined: Tue Sep 25, 2012 6:56 pm
Posts: 491
First name: Aaron
Last Name: Hix
City: Chatsworth
State: Georgia
Zip/Postal Code: 30705
Country: USA
Focus: Build
Status: Professional

I knew that I had some in my stash, from about 20 years ago... Took a look today, and I've got some nice mesquite backs with some figure, like light pomelle. They measure about 21" long, 7.75"wide. I'll have to dig deeper to see if I have any sides, though.

_________________
Guitar Maker and Purveyor of the World's Finest Tonewoods
http://www.aaronhixguitars.com/
http://stores.ebay.com/A-Hix-Tonewood-a ... r-Supplies

Top

Laidback1

Post subject: Re: Mesquite Tone Wood

Posted: Tue Jan 25, 2022 6:36 pm

Contributing Member

Joined: Sun Jul 15, 2012 2:19 pm
Posts: 56
First name: Mark
Last Name: Ballard
State: TX
Focus: Build
Status: Amateur

A.Hix wrote:

That'd be perfect if you have some sides. Do you mind checking. Will definitely buy!

Top

Page 1 of 1

[ 7 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 52 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: