Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 1:02 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Thu Feb 24, 2022 6:44 pm 
Offline
Walnut
Walnut

Joined: Wed Feb 23, 2022 8:18 pm
Posts: 3
First name: Vladimir
Last Name: Mitrović
Country: Serbia
Focus: Repair
Status: Amateur
Hi folks!

I just got a new guitar, it's Cort G260. It played good out of the box but I wanted to set it up myself just to get it to the right spot.
Anyway... I messed around with tremolo a bit (Wilkinson) and now my high e string has that damp, almost sitar-like sound, low E string started to buzz either open or fretted (except after 15th fret) and A and D strings buzz when they are played in an open position.
What I did to tremolo was: I screwed the 2 pivot screws a bit inside the body to lower an action a bit, but then I returned it to its first position.
That's when the buzzing started and now it buzzes no matter what... I raised the saddles to no effect. Can some of you folks here give me some input on what should I do?

Thanks!


Top
 Profile  
 
PostPosted: Thu Feb 24, 2022 6:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
First things first - is your truss rod adjusted properly so that the neck has a minimum of relief? Second - I take it you adjusted the 2 fulcrum points of the bridge, not the saddles?

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: Hesh (Fri Feb 25, 2022 4:43 am)
Top
 Profile  
 
PostPosted: Thu Feb 24, 2022 7:17 pm 
Offline
Walnut
Walnut

Joined: Wed Feb 23, 2022 8:18 pm
Posts: 3
First name: Vladimir
Last Name: Mitrović
Country: Serbia
Focus: Repair
Status: Amateur
Chris Pile wrote:
First things first - is your truss rod adjusted properly so that the neck has a minimum of relief? Second - I take it you adjusted the 2 fulcrum points of the bridge, not the saddles?


Yes, the neck is adjusted properly and all the frets are leveled so there's that. And the nut is cut perfectly.

Yes, I lowered the fulcrum points but then brought them back up to no effect.


Top
 Profile  
 
PostPosted: Fri Feb 25, 2022 1:12 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
All right, are all the screws on the saddles level and tightened down?

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Feb 25, 2022 2:21 am 
Offline
Walnut
Walnut

Joined: Wed Feb 23, 2022 8:18 pm
Posts: 3
First name: Vladimir
Last Name: Mitrović
Country: Serbia
Focus: Repair
Status: Amateur
Chris Pile wrote:
All right, are all the screws on the saddles level and tightened down?

Yup, they are leveled and tightened down. The action follows the radius of the neck


Top
 Profile  
 
PostPosted: Fri Feb 25, 2022 3:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
If this is all true, I can't imagine what's causing your buzz.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Feb 25, 2022 4:55 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
It's winter where you are and the guitar is likely dried out. For a successful set-up which starts with the truss rod adjustment you must first rehumidify the instrument and then have it stabilized for some days at around 45% RH. When it stops moving, wood moves with humidity changes then and only then do you set it up. This means your shop should be maintained at a RH range of 40 - 50% RH.

We rehumidify around 10 or so a week as step one to recovering from letting the guitar dry out. New instruments dry out the fastest, unseasoned wood.

A dry guitar will have sharp fret ends maybe, often the neck goes into back bow and the top lowers itself as the dome reduces and the strings come too close to the frets and may fret out and give you that sitar sound. I'm betting that this description of a dry guitar may make sense to you with what you have experienced with this one?


Top
 Profile  
 
PostPosted: Fri Feb 25, 2022 4:14 pm 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
Can you give us measurements for relief, action at the 17th fret, and action at the nut?

How old are the strings, and are they what came with the guitar?



These users thanked the author Conor_Searl for the post: Hesh (Fri Feb 25, 2022 4:29 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com