Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 5:17 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Mar 30, 2022 6:41 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3070
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
Friends (and I guess the rest of you can read this, too :D )--

I've spent some time today engaging in e-commerce to significantly step up my PPE game, in preparation for upcoming finish experiments. In my Internet meandering, I found the below-linked document from 3M that confirms what many have anecdotally told me: Isocyanates will mess you up, BAD, so take serious precautions when using products (like some of our favorite modern finishes) that contain them. Here is the link:

https://multimedia.3m.com/mws/media/777 ... update.pdf

Not a new document, and not new information, but I think it helps explain the point with just the right amount of detail for those of us who did not get that far in the study of chemistry.

I am sure that, for many of you, providing this warning is stating the obvious and beating that old, dead horse (poor horse). But you know, there are a number of things in life that are far worse than overkill. Chief among them is underkill. So, even if it is an old message, please protect yourself from the stuff that makes our guitars shiny.



These users thanked the author doncaparker for the post (total 5): Robbie_McD (Thu Mar 31, 2022 7:13 am) • Colin North (Thu Mar 31, 2022 2:34 am) • Durero (Thu Mar 31, 2022 12:36 am) • bcombs510 (Wed Mar 30, 2022 8:09 pm) • Toonces (Wed Mar 30, 2022 7:15 pm)
Top
 Profile  
 
PostPosted: Wed Mar 30, 2022 7:15 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Nov 21, 2013 2:03 pm
Posts: 569
First name: Toonces
Last Name: the Cat
City: New Smyrna Beach
State: FL
Country: United States
Focus: Build
Status: Amateur
Isocyanates are indeed, very dangerous chemicals to breathe -- but there are a lot of chemicals you don't want in your lungs with waterborne paints too. The point is that anybody doing spray finishing should be fully protecting their lungs and body.

If you do mess with isocyanates -- I strongly recommend wearing full body protective gear (Tyvek suit with gloves) -- a respirator with a good VOC cartridge is fine for the small amount of spraying needed with guitars. Just be sure to replace the cartridge before it goes bad. I replace mine after I spray 4 guitars -- I build in batches of 2. I could probably use these for significantly longer than I do (maybe 10x) but I don't want to entertain any risk. Once you open a VOC cartridge, place it in a ziplock bag when you are done -- it will continue to filter the environment and will go bad in 6 months -- the ziplock bag will slow this down from what I've been told.

To make sure your mask is working, go over and smell from a container with VOCs (acetone or MEK work great for this because of their easily identifiable smell) -- you should smell absolutely nothing before you start spraying. IF you begin to smell anything at all, change to a new filter immediately.

------------------------

If you take proper and reasonable precautions, then spraying some of these dangerous paints can be made perfectly safe.



These users thanked the author Toonces for the post (total 2): Michaeldc (Thu Mar 31, 2022 8:18 am) • Durero (Thu Mar 31, 2022 12:35 am)
Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 2:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5492
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Nicely timed warning. I've also seen a few posts recently about cyanoacrylic getting into eyes, as if breathing the fumes isn't bad enough......

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 5:09 am 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 985
First name: Josh
Focus: Build
Status: Amateur
Ahh yes a squirt of thin CA directly to the eyeball - the luthiery rite of passage :D


Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 6:10 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5492
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
joshnothing wrote:
Ahh yes a squirt of thin CA directly to the eyeball - the luthiery rite of passage :D

Which I could do very well without...

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: bcombs510 (Thu Mar 31, 2022 8:48 am)
Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 8:49 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3594
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Thanks, Don.

Prompted me to order cartridge refills for the respirator. They were due. ;)


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 9:44 am 
Online
Contributing Member
Contributing Member
User avatar

Joined: Thu May 12, 2005 5:46 am
Posts: 2968
Location: United States
Also, you should store your respirators in and airtight container like a zip lock bag or some such thing, it helps preserve the cartridges.

_________________
Jim Watts
http://jameswattsguitars.com



These users thanked the author Jim Watts for the post: bcombs510 (Thu Mar 31, 2022 11:55 am)
Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 9:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
A lot of things in this world, and especially OUR world are harmful in certain ways. Frankly, I don't need some quasi gubment agency to tell me about it. I try to read about what I use, how to use it, and why. Informed is forearmed, or some such stuff. duh

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: bcombs510 (Thu Mar 31, 2022 11:55 am)
Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 11:56 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3263
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
3M is a large manufacturer of products in Minnesota that includes respirators. They provide information about their products that you can read.



These users thanked the author Barry Daniels for the post (total 2): bcombs510 (Thu Mar 31, 2022 8:48 pm) • TimAllen (Thu Mar 31, 2022 12:49 pm)
Top
 Profile  
 
PostPosted: Thu Mar 31, 2022 8:08 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Oct 17, 2006 3:52 am
Posts: 1263
City: Lawrence
State: Kansas
Zip/Postal Code: 66047
Status: Amateur
Colin North wrote:
joshnothing wrote:
Ahh yes a squirt of thin CA directly to the eyeball - the luthiery rite of passage :D

Which I could do very well without...



Ya got that right.

_________________
Say what you do, Do what you say.



These users thanked the author Dave Rickard for the post: Colin North (Fri Apr 01, 2022 3:55 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com