***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 28, 2024 12:20 am


Board index » Instrument Restoration and Repair

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Smylight
PostPosted: Sat Jul 30, 2022 9:17 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 400
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Professional
Hello everyone,

Like any repair shop, I do quite a bit of headstock repairs, and have been more than a bit envious of Dave and Hesh's jig. But not having machinist tools, let alone skills, I get by making custom cauls quite often. That's a RPITA, not to mention the time it takes to assemble the whole shebang, pretty much precluding the use of HHG.

While shopping for a long radius beam at Guitars and Woods (Portugal, check their prices folks!) I stumbled upon a new jig of theirs for gluing broken headstocks they’re selling pretty cheaply.

Anyone tried it yet? I fully realize it's made of wood and I could make one of those, but hey, time is money.

http://guitarsandwoods.com/index.php?ro ... ct_id=4244


Pierre
Guitares Torvisse

_________________
Pierre Castonguay
Top
 Profile  
 
fumblefinger
PostPosted: Sat Jul 30, 2022 7:29 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 414
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
Sorry, I read down and just got to yours. See my post here (viewtopic.php?f=10137&t=55157) for some ideas. What I don't like about this "jig" is that it still involves adding clamps with the resulting lack of how tight to tighten them.


These users thanked the author fumblefinger for the post: Smylight (Sun Jul 31, 2022 8:07 pm)
Top
 Profile  
 
dradlin
PostPosted: Mon Aug 01, 2022 10:49 am 
Offline
Mahogany
Mahogany

Joined: Sun May 09, 2010 6:10 am
Posts: 64
First name: David
Last Name: Radlin
City: Belle River
State: Ontario
Zip/Postal Code: N0R 1A0
Country: Canada
Focus: Repair
Status: Semi-pro
I built one along the same line about ten years ago and it has served me very well since… my most used jig in fact.

https://www.facebook.com/media/set/?set ... 216&type=3

_________________
David Radlin
http://www.facebook.com/radlin.guitars


These users thanked the author dradlin for the post (total 3): Doc (Tue Aug 02, 2022 8:54 am) • joshnothing (Tue Aug 02, 2022 5:35 am) • Hesh (Tue Aug 02, 2022 2:19 am)
Top
 Profile  
 
Hesh
PostPosted: Tue Aug 02, 2022 2:19 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
dradlin wrote:
I built one along the same line about ten years ago and it has served me very well since… my most used jig in fact.

https://www.facebook.com/media/set/?set ... 216&type=3


Very cool jig David!!


These users thanked the author Hesh for the post: dradlin (Tue Aug 02, 2022 6:42 pm)
Top
 Profile  
 
jfmckenna
PostPosted: Tue Aug 02, 2022 2:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
fumblefinger wrote:
Sorry, I read down and just got to yours. See my post here (http://luthiersforum.com/forum/viewtopi ... 37&t=55157) for some ideas. What I don't like about this "jig" is that it still involves adding clamps with the resulting lack of how tight to tighten them.


They don't even show adding clamps in the video:

https://www.youtube.com/watch?v=7Q2evQIbp00

I'm not so sure that is adequately clamped up. I would definitely want to make some cork lined cauls to smoosh the knife edge ends of the break down nice and tight.


These users thanked the author jfmckenna for the post: Hesh (Wed Aug 03, 2022 3:48 am)
Top
 Profile  
 
Smylight
PostPosted: Tue Aug 02, 2022 10:43 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 400
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Professional
dradlin wrote:
I built one along the same line about ten years ago and it has served me very well since… my most used jig in fact.

https://www.facebook.com/media/set/?set ... 216&type=3

Very cool jig indeed David, very similar but quite clearly a better build. Gives me confidence that G&W's would work well enough.


Pierre
Guitares Torvisse

_________________
Pierre Castonguay


These users thanked the author Smylight for the post: dradlin (Wed Aug 03, 2022 2:48 pm)
Top
 Profile  
 
Smylight
PostPosted: Tue Aug 02, 2022 10:45 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 400
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Professional
jfmckenna wrote:
fumblefinger wrote:
Sorry, I read down and just got to yours. See my post here (viewtopic.php?f=10137&t=55157) for some ideas. What I don't like about this "jig" is that it still involves adding clamps with the resulting lack of how tight to tighten them.


They don't even show adding clamps in the video:

https://www.youtube.com/watch?v=7Q2evQIbp00

I'm not so sure that is adequately clamped up. I would definitely want to make some cork lined cauls to smoosh the knife edge ends of the break down nice and tight.

Right, I see this as quite possibly a good starting point but I agree with you, it will need some refining.


Pierre
Guitares Torvisse

_________________
Pierre Castonguay
Top
 Profile  
 
Smylight
PostPosted: Tue Aug 09, 2022 7:15 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Mar 17, 2017 8:42 pm
Posts: 400
First name: Pierre
Last Name: Castonguay
City: Québec, Qc
Country: Canada
Focus: Repair
Status: Professional
Just received the headstock repair jig from G&W. I'm happy to report that it's very sturdily built. Their stuff is usually very well made so that's no surprise. Almost can't wait to try it… ;-)

While I was at it, I couldn’t help ordering another 20" long aluminum radius beam to the collection… at 41€ a pop they are irresistible. Shipping ain't cheap, but it's very fast (3 days from Portugal to Canada) and is calculated in tiers, so I always add all I can to fill the box.


Pierre
Guitares Torvisse

_________________
Pierre Castonguay


These users thanked the author Smylight for the post: Hesh (Tue Aug 09, 2022 7:29 am)
Top
 Profile  
 
Hesh
PostPosted: Tue Aug 09, 2022 7:32 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Smylight wrote:
Just received the headstock repair jig from G&W. I'm happy to report that it's very sturdily built. Their stuff is usually very well made so that's no surprise. Almost can't wait to try it… ;-)

While I was at it, I couldn’t help ordering another 20" long aluminum radius beam to the collection… at 41€ a pop they are irresistible. Shipping ain't cheap, but it's very fast (3 days from Portugal to Canada) and is calculated in tiers, so I always add all I can to fill the box.


Pierre
Guitares Torvisse


Congrats on the new tools Pierre!

I wanted to suggest that if you have access to a surface plate we used surface plates to true up all of our leveling beams, we have over 20 of them and we used to check them every year on the plate too but discovered that they were not changing.

You can really dial in a beam on a surface plate and get even better results from it on guitars as a result.


These users thanked the author Hesh for the post: Smylight (Tue Aug 09, 2022 1:44 pm)
Top
 Profile  
 
phavriluk
PostPosted: Tue Aug 09, 2022 12:39 pm 
Online
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 1041
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
The first tool I put into my guitar work area was a granite surface plate I bought from Grizzly. Nice to have a dead-flat reference. Even came with a calibration report.

_________________
Peter Havriluk


These users thanked the author phavriluk for the post (total 2): joshnothing (Tue Aug 09, 2022 4:24 pm) • Smylight (Tue Aug 09, 2022 1:45 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com