Official Luthiers Forum!

Spent two full days making a flip cart using the Kings woodworking plan. Some errors along the way but it came out good. I will most likely swap the wheels as they are not very friendly. It’s what the plan called for so I went with it.

I also botched the pin locations so ended up having to drill a set of holes for each tool. I made handles which flip depending on which tool is in use.














Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Looks great, Brad! I like the nook on the side for blades and such. You can’t store the nick-nacks on the part that flips!

Wow! That's a fancy idea.

Thats awesome Brad!

_________________
Measure Twice,

Karl Borum

That's a sweet cart Brad!
Super inspiring

Not in my shop, but close by. Final sanding and rounding over edges and then on to applying the finish.

Happy Holidays to everyone on the OLF.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Brad, I like the little signs so that you can tell the planer from the miter saw.:>) Just kidding. That is a very nice set up.

Gonna be a beauty!

Happy holiday to you and the family!

M&K

Just returned to New York from Granada for the holidays and managed to get this Torres homage to the varnisher just before my flight

Shop reconstruction is completed and Christmas is over. Time to get back to work!









Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

The fixture I use to hold a neck in the vice when I'm carving it was leaned up against the bench, tipped over, and this happened. Maybe I should put a Gibson logo on it before I glue it back together.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Finish a year, finish a build.

Build # 12 - Concert Standard, 12 fret, 24.9" scale, Sitka/Sapele, Maple binding, French polish.

All the best for 2024!

_________________
Craig

Craig, that is lovely!

I’m phasing out the LMI universal binding jig carrier for these. I have a few more shapes to make for the baseplates. The stanchions are swappable to whatever base I need. I experimented with magjig for this but didn’t like the results so went back to the standard threaded knob and carriage bolts.











Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Binding on the ziricote 00. I CANNOT WAIT to never make dust from this thing again!













Brad


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

The first coat of epoxy pore filler is on this one.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

That's a beaut!

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.

Jay, the koa binding is it man. Looks great.


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Yea, I really like the combination of Indian rosewood and curly koa binding. I got a bunch of this binding some years ago from Bob Gleason of Pegasus Guitars in Hawaii. He used to produce and sell gorgeous koa binding. He even sold it in bunches that were made up of adjacent pieces all cut from the same larger piece of koa so that the color and curl was consistent. Great stuff.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Brad it might not have been fun but that is going to look wonderful.

Jay absolute love it. Does the curl make it hard to bend?

Dave

There's been no problem bending it on a bending iron for the body binding on three instruments: the one above, a dreadnought, and a parlor. The waist bend on the parlor has a radius of 1 3/4" so it's pretty tight. The binding was 0.080" thick for all three.

Bending it for soundhole binding has been a different story. I got it on the first try for the dreadnought, which has the largest soundhole diameter. The first attempt for the parlor broke, but the second one worked. For the mandocello, it took five attempts to get an intact ring. The fails are shown below. I think the difference this time was due to variability between different sets of koa binding. And, the pieces being bent for the soundhole binding are inherently fragile since they are only about 0.100" tall instead of 1/4" tall. I tried bending both with and without SSII treatment and there was no difference. I had to hold my mouth just right to get the fifth one.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

I use Koa often for binding. (Wish Bob still sold it, I’m nearly out). In my learning curve of bending it, and breaking a lot, I found spraying it with water works great. Just a spritz and into the fox bender.

I'm on my last set of curly Koa from Bob, he always sold nice Koa!

_________________
Steve Smith
"Music is what feelings sound like"

Looking great Jay. Are you using Zpoxy or something else?

I have used Zpoxy, but I'm now using System Three SilverTip epoxy with the fast hardener. They've both worked for me, but Zpoxy doesn't cure properly below 70 degrees and my shop is often below that, especially this time of year. Also, SilverTip doesn't have such a strong toxic smell.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter

Experimenting with an app called CapCut to try to up my video quality for social media. Getting there!

https://www.instagram.com/reel/C2BM9yGO ... 92YWdrMjZo

https://www.instagram.com/reel/C2Dk_4SO ... N1Y2ZjZg==


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars