Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Tinting Shellac

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Michael Dale Payne

Post subject:

Posted: Tue Apr 18, 2006 3:40 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

Yes use the translucent. There is no differance in Seal Coat and any other wax free shellac other than the formula of the solvent. I am not sure what it is but some additive in their solvent keeps the mix from going bad for a long duration. other than that it is cut shellac. Now before you tint be sure to test because Seal Coat is much more amber than cut extra blonde, I believe it is about 50/50 mix of amber and blonde

Top

Dave-SKG

Post subject:

Posted: Tue Apr 18, 2006 3:58 am

Koa

Joined: Wed Dec 29, 2004 5:34 am
Posts: 1906
Location: United States

I always tint my Shellac by adding a darker grade/shade of flake (mixed up). I add very little at a time and test on a sample board. You realy shouldn't be able to see the "tint" too much if at all. If you do see it, it is probably too dark and will wind up being more than you wanted when your done.

_________________
Dave Bland

remember...

"If it doesn't play in tune...it's just pretty wood"

Top

Page 1 of 1

[ 4 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 20 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: