***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Jul 27, 2025 10:42 am


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
Mike_P
 Post subject: Re: Menzerna Solid Bars
PostPosted: Mon Jul 21, 2025 9:02 pm 
Offline
Koa
Koa

Joined: Tue Jan 22, 2008 8:57 pm
Posts: 780
Location: Austin, Texas
FUBAR?

you sure it's not a SNAFU?

gaah


These users thanked the author Mike_P for the post: Kbore (Tue Jul 22, 2025 9:51 am)
Top
 Profile  
 
Kbore
 Post subject: Re: Menzerna Solid Bars
PostPosted: Tue Jul 22, 2025 10:15 am 
Offline
Koa
Koa

Joined: Thu Jan 11, 2018 9:19 am
Posts: 630
Location: St. Charles MO
First name: Karl
Last Name: Borum
State: MO
Zip/Postal Code: 63303
Country: United States
Focus: Build
James Orr wrote:
I can't believe it was 2016 when Chris Ensor shared this... :shock: ...but it was extremely helpful to me at the time, and still the routine I follow to this day (P204 on 60/60 cotton wheels, followed by P175 on dommet flannel wheels).

For sanding, I've been dry sanding up to 1000 using Festool disks on my Festool ETS-125, then buffing following the above routine. I'm pretty interested in all the discussion regarding the Eagle Abrasives Super Assilex, and might get the starter kit from Stew-Mac for my next finish just to try them out. I don't remember exactly which Festool disks I use, but I can look later when I'm home.


The Tolecut Starter Kit - 8-Cut kit is amazing for spot sanding of finish repairs, drop fills, finish runs and nibbs, light scratches . Same abrasive, different backing pad, different method, it's really genius- an amazing product. amazon: https://a.co/d/fFXpLwv

_________________
Measure Twice,

Karl Borum
Top
 Profile  
 
kjaffrey
 Post subject: Re: Menzerna Solid Bars
PostPosted: Thu Jul 24, 2025 6:52 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Feb 02, 2008 9:19 am
Posts: 185
Focus: Build
Status: Amateur
I tried the superassilex and super bufflex (only the first couple grits were needed) on my last guitar and found it phenomenal. I have always preferred dry sanding lacquer so it easier to see the shiny low spots and had been using 3m frecut gold to start and then wet sanding before buffing p205 and w16.

The assilex cut so smoothly and evenly and could be used dry though all the grits. It also didn’t leave any stray scratches to show up during buffing that I would get with my other method. It made the buffing go so much more quickly it was great.

In a month or so I’ll be doing my next guitar so hopefully it is just as good a second experience.


These users thanked the author kjaffrey for the post: Kbore (Thu Jul 24, 2025 10:12 am)
Top
 Profile  
 
Kbore
 Post subject: Re: Menzerna Solid Bars
PostPosted: Sat Jul 26, 2025 11:54 am 
Offline
Koa
Koa

Joined: Thu Jan 11, 2018 9:19 am
Posts: 630
Location: St. Charles MO
First name: Karl
Last Name: Borum
State: MO
Zip/Postal Code: 63303
Country: United States
Focus: Build
kjaffrey wrote:
I tried the superassilex and super bufflex (only the first couple grits were needed) on my last guitar and found it phenomenal. I have always preferred dry sanding lacquer so it easier to see the shiny low spots and had been using 3m frecut gold to start and then wet sanding before buffing p205 and w16.

The assilex cut so smoothly and evenly and could be used dry though all the grits. It also didn’t leave any stray scratches to show up during buffing that I would get with my other method. It made the buffing go so much more quickly it was great.

In a month or so I’ll be doing my next guitar so hopefully it is just as good a second experience.


What is your buffing method and schedule?

_________________
Measure Twice,

Karl Borum
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com