Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 12:17 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject:
PostPosted: Mon May 21, 2007 2:39 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2104
Location: Toronto, Ontario, Canada
First name: Anthony
Last Name: Zlahtic
City: Toronto
Country: Canada
Focus: Build
Status: Amateur
Todd, great tutorial and post. Many thanks!


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 21, 2007 3:27 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas
Neat. You are a gambler Todd. I see you won the bet! Thanks for sharing.   

_________________
http://www.dickeyguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 21, 2007 7:21 pm 
Offline
Contributing Member
Contributing Member

Joined: Thu Sep 22, 2005 11:57 am
Posts: 352
Location: Los Osos CA
Focus: Repair
Very fine tutorial. I like the use of the small tablesaw
blades also, whenever possible- keeping those tip speeds *down*! For myself, I'd remove the waste with a little ripsaw, because I detest the dust- requires hand support for the cut, though. YMMV..


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 12:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build
Nice technique. Much better than mine. I use a hand plane to get it close
and finish with my sanding radius dish

_________________
Andy Z.
http://www.lazydogguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 2:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Nice Todd!  Good pictures for showing the process.  It does, however, require "Attitude" and "Conviction" that you are comfortable with the tool.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 4:32 am 
Offline
Koa
Koa
User avatar

Joined: Mon Sep 12, 2005 12:40 am
Posts: 1900
Location: Spokane, Washington
First name: Pat
Last Name: Foster
State: Eastern WA
Focus: Build
Thanks, Todd! I cringe whenever I have to put my whole hand on that side of the fence, but I like your method. Fast and accurate. Maybe I need to cobble up a jig.

_________________
now known around here as Pat Foster
_________________
http://www.patfosterguitars.com


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 4:46 am 
Offline
Koa
Koa
User avatar

Joined: Thu Mar 30, 2006 4:33 am
Posts: 1518
Location: Canada
Great tutorial!
Many thanks!
Cheers
Charliewood


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 4:56 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Dec 20, 2005 7:46 am
Posts: 2227
Location: Canada
Great tutorial Todd! I will have to try that for sure!

_________________
I'd like to be able to prove, just for once, that money wouldn't make me happy...


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 10:45 am 
Offline
Koa
Koa
User avatar

Joined: Thu Dec 01, 2005 3:05 pm
Posts: 503
Location: Portland, Oregon
Great tutorial Todd.

Peace,Rich


Top
 Profile  
 
 Post subject:
PostPosted: Tue May 22, 2007 11:57 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
Looks good with one exception. I'd be a little concerned about the "rocker" factor that the body will want to make as passing through the saw. The back of the blade is trying to pull up the guitar and the front is trying to slam it down. Since this is not a flat piece of stock going through it's a pretty unstable cut. If I were you, I'm make a cradle teh the rib will sit in as it passes through.
I'm a safety fanatic on the table saw and this is a cut I'd think twice about making.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com