Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Bending cocobolo

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

BOBP

Post subject:

Posted: Sun Jul 29, 2007 9:07 am

Cocobolo

Joined: Thu Dec 01, 2005 2:36 pm
Posts: 111
Location: United States

Help Please I just bent my first set of cocobolo and it bent great but it came out of the bender nasty looking very dark even though I kept it below 300. Is there somthing I can use to clean the resin off of the sides?
They are already at .085 so I not wanting to sand it any more.I used stainless steel slats and two blankets.
I've used Ir and Pau Ferro in the past and did not have any problems.

Thanks in advance BobP

Top

LanceK

Post subject:

Posted: Sun Jul 29, 2007 9:09 am

Site Admin

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro

Use some acetone.

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Top

TonyKarol

Post subject:

Posted: Sun Jul 29, 2007 9:11 am

Contributing Member

Joined: Fri Sep 09, 2005 7:51 am
Posts: 3786
Location: Canada

leave it til you are ready to bind, then give it a light scrape - it will all come off pretty easily. Happens with cocobolo gold all the time ... lots of resins in there.

_________________
Tony Karol
www.karol-guitars.com
"let my passion .. fulfill yours"

Top

letseatpaste

Post subject:

Posted: Sun Jul 29, 2007 11:50 am

Koa

Joined: Mon May 09, 2005 1:41 am
Posts: 1157
Location: Siloam Springs, AR

A little sanding or scraping will brighten it up, at least that's what worked for me. .085 doesn't sound dangerously thin.

_________________
______________________________
Jonathan Kendall, Siloam Springs AR

Top

Bruce Dickey

Post subject:

Posted: Sun Jul 29, 2007 12:46 pm

Brazilian Rosewood

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas

Use paper next time to catch the resin. Acetone will dissolve the baked on resin as Lance mentions.

One caution to woods such as these in the bender. Wear a charcoal respirator to avoid breathing the fumes. If the dust is bad, it's just possible the vapors are bad too.

Read the warnings on Osmose or Wolmanized treated deck lumbers. They advise to quickly wash off skin contact with dust. They also advise not burning the refuse material and breathing the fumes. My thoughts are the same for Cocobolo and many other exotics.

Hey Bob, did you post any pictures? I didn't think so.

_________________
http://www.dickeyguitars.com

Top

Bruce Dickey

Post subject:

Posted: Sun Jul 29, 2007 11:37 pm

Brazilian Rosewood

Joined: Wed Feb 01, 2006 3:25 am
Posts: 3788
Location: Russellville, Arkansas

Todd, that's one of the nicest cutaway bends I've ever seen. Also, that's one of the nicest rosettes I've ever seen. Also, that's one of the prettiest tops I've ever seen. Got any shots of the guitar put together? bd

_________________
http://www.dickeyguitars.com

Top

BOBP

Post subject:

Posted: Mon Jul 30, 2007 12:34 am

Cocobolo

Joined: Thu Dec 01, 2005 2:36 pm
Posts: 111
Location: United States

Thanks Guys I'll give it a go with acetone

Top

Howard Klepper

Post subject:

Posted: Mon Jul 30, 2007 3:34 am

Brazilian Rosewood

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692

No need for acetone. That scorched resin sands off easily. You need to sand anyway.

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.

Top

Page 1 of 1

[ 11 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: