***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 6:07 pm


Board index » Forum Archive

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 25 posts ] 
  Print view Previous topic | Next topic 
Author Message
Glenn LaSalle
 Post subject:
PostPosted: Wed Sep 05, 2007 1:58 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 25, 2007 2:05 am
Posts: 685
Location: Saint Petersburg, Florida
First name: Glenn
Last Name: LaSalle
City: Saint Petersburg
State: Florida
Status: Amateur

Hi Folks,


I have been going through the OLF archives to 1. do research for the continuation of getting my shop in line to start my 1st build; and 2. identify tools/strategies on how I want to build number 1.


It looks like I want to use a Lam Trimmer for both bindings and rosette.  I noticed alot of positive feedback for the Wells/Karol rosette jig.  My question:  I have more $ on hand than time (tho not much more ), given the pressures of work and family - is there a place to purchase a Wells/Karol inspired Rosette Jig?


Thx!


Glenn
Top
 Profile  
 
Shane Neifer
 Post subject:
PostPosted: Wed Sep 05, 2007 3:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
Hey Glen,

Did you check with Sylvan? He can probably do it for you. Otherwise, if you are really stuck, I mean REALLY stuck, I may be able to put one together for you. I have the threads documenting the process and the materials, it is just time I am short of.

Good Luck

Shane

_________________
Canada
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Wed Sep 05, 2007 5:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
I made a version of this jig, it was pretty straight forward. Having one maked will surely take longer... Then again, I have lots of jig building materials laying around (JUNK!) and a well equipped shop and besides; shipping costs prohibits buying too much from overseas for me, so I'm used to making my own or'getting by'. Anyways, it struck me that someone so inclined (not me!) could fabricate a bunch of these to sell quite easily...

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Wed Sep 05, 2007 5:45 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Man, that was poor English, even for me! Let me rephrase:

...Ordering one to be made by someone else will surely take longer

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
Glenn LaSalle
 Post subject:
PostPosted: Wed Sep 05, 2007 9:31 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 25, 2007 2:05 am
Posts: 685
Location: Saint Petersburg, Florida
First name: Glenn
Last Name: LaSalle
City: Saint Petersburg
State: Florida
Status: Amateur

Thanks Shane - I am new to the forum, so I apologize as I am not sure who Sylvan is...


Arnt, I figure I have so much to do to get things going, that I would be best off - if possible - to see if I could purchase the jig. 


Thx Again!


Glenn
Top
 Profile  
 
Shane Neifer
 Post subject:
PostPosted: Wed Sep 05, 2007 9:51 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada
Hey Glenn,

Sylvan is Wells, Sylvan Wells. Just google him, you will get to his site, he has a good tutorial on building the gig and I think he had said he would make some for sale, but don't quote me on that!

Shane

_________________
Canada
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Wed Sep 05, 2007 9:57 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Sylvan Wells is a guitar maker and a member of the OLF. In addition to making fine guitars he has a web site with many articles of interest to luthiers, one of which describes how you can make a Precision Router Base

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
Arnt Rian
 Post subject:
PostPosted: Wed Sep 05, 2007 9:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
Typing too slowly again...

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
Glenn LaSalle
 Post subject:
PostPosted: Wed Sep 05, 2007 10:08 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 25, 2007 2:05 am
Posts: 685
Location: Saint Petersburg, Florida
First name: Glenn
Last Name: LaSalle
City: Saint Petersburg
State: Florida
Status: Amateur

[QUOTE=Shane Neifer]Hey Glenn,

Sylvan is Wells, Sylvan Wells. Just google him, you will get to his site, he has a good tutorial on building the gig and I think he had said he would make some for sale, but don't quote me on that!

Shane[/QUOTE]


Thx!!! 


Glenn
Top
 Profile  
 
Pwoolson
 Post subject:
PostPosted: Wed Sep 05, 2007 11:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
Glenn, try this
Micro Jig


Top
 Profile  
 
Allen McFarlen
 Post subject:
PostPosted: Wed Sep 05, 2007 6:49 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Dec 01, 2006 6:44 pm
Posts: 471
Location: Australia
First name: Allen
Last Name: McFarlen
City: Mt. Sheridan
State: Qld.
Zip/Postal Code: 4868
Country: Australia
Focus: Build
Status: Professional
I followed Sylvans directions to build mine out of the junk that I had lying around the shop. It was a pleasant Sunday afternoon of tinkering and I'm so pleased at how well it turned out and the ease of use. All it cost was time and a couple of beers while I admired my work.

_________________
Allen R. McFarlen
Barron River Guitars & Ukuleles
Facebook
Cairns, Australia
Top
 Profile  
 
Todd Rose
 Post subject:
PostPosted: Thu Sep 06, 2007 12:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Nov 11, 2005 3:32 am
Posts: 2683
Location: Ithaca, New York, United States
Another possibility is the Bishop Cochran laminate trimmer base with circle cutter. I just recently got an email from those guys saying they have some available again (after an extended time of them not being available), and ordered one. Google for them or look on the Allied Lutherie site. Everybody says these bases are fantastic, and I fully expect to get more than my money's worth of use out of it, for circle cutting and lots of other stuff as well.

_________________
Todd Rose
Ithaca, NY

https://www.dreamingrosesecobnb.com/todds-art-music

https://www.facebook.com/ToddRoseGuitars/
Top
 Profile  
 
Brock Poling
 Post subject:
PostPosted: Thu Sep 06, 2007 9:59 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States
[QUOTE=Todd Rose] Another possibility is the Bishop Cochran laminate trimmer base with circle cutter. I just recently got an email from those guys saying they have some available again (after an extended time of them not being available), and ordered one. Google for them or look on the Allied Lutherie site. Everybody says these bases are fantastic, and I fully expect to get more than my money's worth of use out of it, for circle cutting and lots of other stuff as well.[/QUOTE]

I am a raving fan, and I use mine for a lot more than just cutting rosettes.

They are expensive, but well worth it.

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com
Top
 Profile  
 
Rick Turner
 Post subject:
PostPosted: Thu Sep 06, 2007 10:43 am 
Offline
Koa
Koa

Joined: Wed Aug 24, 2005 11:13 am
Posts: 1398
Location: United States
Does nobody here use a drill press mounted fly cutter-style arrangement? That's what all the big guys do...Taylor, Martin, etc.; LMI sells one and we use it; Ed Claxton made his own. It's fast, clean, and easy.   
Top
 Profile  
 
Pwoolson
 Post subject:
PostPosted: Thu Sep 06, 2007 10:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jan 08, 2005 1:26 am
Posts: 2556
Location: United States
Rick, I had one of those once. They are nice if you do the exact same thing every time. But I found adjusting it to be a nightmare.


Top
 Profile  
 
James Orr
 Post subject:
PostPosted: Thu Sep 06, 2007 11:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
During my first lutherie push, I ordered a Greven rosette cutter from LMI
and didn't realize it didn't come with cutters. I didn't know how to make
the cutters, so I sold it. The joy of learning on your own at 20 years old.

I'm very interested in this jig, but still confusion about what's going on in
the middle section. I understand that you do the gross adjustment by
loosening the two knobs. Once there, tighten the knob on the telecaster
end and leave the knob on the middle section loose. Fine adjust by using
the tele knob. I can see that that pulls the middle section closer to the
tele side, but the middle section isn't connected to the router. How does
this pull the router in or push it out?
Top
 Profile  
 
James Orr
 Post subject:
PostPosted: Thu Sep 06, 2007 11:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
But still *have some* confusion . . .


Top
 Profile  
 
WaddyThomson
 Post subject:
PostPosted: Thu Sep 06, 2007 11:22 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
The pin is mounted in the middle section, on the little extension, that moves.  So by moving that section, you are moving the pin relative to the bit in the trimmer.

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars
Top
 Profile  
 
Kent Chasson
 Post subject:
PostPosted: Thu Sep 06, 2007 2:58 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Mar 23, 2007 9:56 am
Posts: 1271

Well sharpened hardware store fly-cutters work great for me.  For a couple hundred bucks, you can buy enough of them to do several rosette styles.  They are cheap enough to dedicate one to each task and grind the bit to suit.


_________________
http://www.chassonguitars.com
Top
 Profile  
 
Blain
 Post subject:
PostPosted: Thu Sep 06, 2007 5:07 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jan 07, 2007 1:14 pm
Posts: 761
First name: Blain
City: Leander
State: Texas
Country: United States
Focus: Build
I have the LMI circle cutter that was mentioned above and like Paul said, it is a bit of a pain to change, which in my opinion is mostly due to a lack of shims so I'm constantly trying differnt arrangements to try and get what I want. I think if I bought or made additional shims to where I had what I needed, it wouldn't be as bad. (Still not a breeze to set up, but I think it would help). The other issue that I've had is trying to get the cutters all lined up to where they're cutting the same depth.

_________________
Thanks,
Blain

http://www.ullrichguitar.com

"89.67% of all statistics are made up on the spot."
Top
 Profile  
 
KenH
 Post subject:
PostPosted: Fri Sep 07, 2007 2:32 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida

I treid the fly cutter route as well, and even ground several cutters to suit my many needs. My problem is that my table for my drill press is actually a scrap desk top from a elementary school desk. It is quite thick and sturdy, but getting it perfectly level has been more of a challenge than I want. I never did cut the channels the same depth all the way around because of the desk top not being perfectly level.


I have abandoned the fly cutters and I now use a circle cutting jig with a laminate trimmer mounted on it. I picked this up in the last swap meet and it works like a dream. I even bought some 1/8" collets so that I can use the smaller dremel type cuters in it for the smaller rosette channels.


_________________
Reguards,

Ken H
Top
 Profile  
 
Glenn LaSalle
 Post subject:
PostPosted: Fri Sep 07, 2007 6:49 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Aug 25, 2007 2:05 am
Posts: 685
Location: Saint Petersburg, Florida
First name: Glenn
Last Name: LaSalle
City: Saint Petersburg
State: Florida
Status: Amateur

I really Appreciate all the replies and suggestions!!  Sylvan was kind enough to accomodate my purchase request.


Glenn
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 25 posts ] 

Board index » Forum Archive

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com