***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Nov 29, 2024 2:36 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 
  Print view Previous topic | Next topic 
Author Message
Robbie O'Brien
 Post subject: Bridge patch thickness
PostPosted: Sun Mar 16, 2008 10:20 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 19, 2005 5:23 am
Posts: 2347
Location: United States
I am curious what thickness folks are using for the bridge patches.
Anyone care to share this information?
Top
 Profile  
 
Alain Moisan
PostPosted: Sun Mar 16, 2008 11:35 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Feb 01, 2008 8:47 am
Posts: 1244
Location: Montreal, Canada
Focus: Build
Status: Amateur
Mines are anywhere between .090" to .110".

_________________
Alain Moisan
Former full time builder of Acoustics, Classicals and Flamencos.
(Now building just for fun!)
Top
 Profile  
 
Blanchard
PostPosted: Sun Mar 16, 2008 2:21 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jun 15, 2007 12:14 am
Posts: 332
Location: United States
.100" for me.
Laminated, .050 Brazilian, .050 maple.

Mark
Top
 Profile  
 
Laurent Brondel
PostPosted: Sun Mar 16, 2008 2:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States
.090" for sugar maple, between .090" and .075" for Braz.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/
Top
 Profile  
 
Brock Poling
PostPosted: Sun Mar 16, 2008 3:04 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 1:20 pm
Posts: 5915
Location: United States
Blanchard wrote:
.100" for me.
Laminated, .050 Brazilian, .050 maple.

Mark


If you don't mind... which cap are you putting up (ball end side)?

_________________
Brock Poling
Columbus, Ohio
http://www.polingguitars.com
Top
 Profile  
 
Hesh
PostPosted: Sun Mar 16, 2008 6:27 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13388
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
.090 here BRW or HRW
Top
 Profile  
 
Andy Zimmerman
PostPosted: Sun Mar 16, 2008 9:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jun 10, 2005 9:51 am
Posts: 2148
Location: San Diego, CA
First name: Andy
Last Name: Zimmerman
City: San Diego
State: CA
Zip/Postal Code: 92103
Country: United States
Focus: Build
0.10 EIR for me

_________________
Andy Z.
http://www.lazydogguitars.com
Top
 Profile  
 
Steve Kinnaird
PostPosted: Sun Mar 16, 2008 9:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 05, 2005 3:45 pm
Posts: 4337
Location: United States
.100", Padauk.

Steve

_________________
From Nacogdoches...the oldest town in Texas.

http://www.stephenkinnaird.com
Top
 Profile  
 
Blanchard
PostPosted: Sun Mar 16, 2008 10:33 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jun 15, 2007 12:14 am
Posts: 332
Location: United States
Brock Poling wrote:
Blanchard wrote:
.100" for me.
Laminated, .050 Brazilian, .050 maple.

Mark


If you don't mind... which cap are you putting up (ball end side)?



Maple glues to the soundboard, Braz takes the wear from the ball ends.

Mark
Top
 Profile  
 
Chas Freeborn
PostPosted: Sun Mar 16, 2008 11:59 pm 
Offline
Koa
Koa

Joined: Tue Mar 01, 2005 3:00 pm
Posts: 656
Location: United States
Focus: Build
Status: Professional
3/32" for me. VG Rock Maple.
I'm going to try out Frank Fords suggestion of running the patch grain parallel with the top as soon as I get over to the lumber yard and find a tight grain vg piece that's 7" wide...
-C

_________________
Freeborn Guitars
and home of BeauGuard©
Top
 Profile  
 
Alain Desforges
PostPosted: Mon Mar 17, 2008 6:40 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Dec 20, 2005 7:46 am
Posts: 2227
Location: Canada
Usually around 90-100 thou with maple and EIR. I went down to about 60 thou on the last one made out of rock-hard Makore. With the high silica count, I figured it should do fine...

_________________
I'd like to be able to prove, just for once, that money wouldn't make me happy...
Top
 Profile  
 
Michael Dale Payne
PostPosted: Mon Mar 17, 2008 9:18 am 
Offline
Old Growth Brazilian
Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States
maple. .09
Top
 Profile  
 
Mike Collins
PostPosted: Tue Mar 18, 2008 1:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2485
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
Robbie;
Did you mean for nylon strung guitars ?
If so mine are usually tapered from -1.5mm at the centerline and tapered to .5mm at the ends.
length at laeast as long as my bridge -but sometimes 20mm past the bridge length.
I've made full top width ones but the tone was a bit brittle.
width -15-25mm depending on what top I'm using and the sound I'm after for that guitar
Mike

_________________
Mike Collins
Top
 Profile  
 
Robbie O'Brien
PostPosted: Tue Mar 18, 2008 2:10 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Jan 19, 2005 5:23 am
Posts: 2347
Location: United States
Mike Collins wrote:
Robbie;
Did you mean for nylon strung guitars ?
If so mine are usually tapered from -1.5mm at the centerline and tapered to .5mm at the ends.
length at laeast as long as my bridge -but sometimes 20mm past the bridge length.
I've made full top width ones but the tone was a bit brittle.
width -15-25mm depending on what top I'm using and the sound I'm after for that guitar
Mike



Mike,

I was actually referring to steel string bridge patches but thanks for the info on the classical patches. I do something similar on my classicals.
Top
 Profile  
 
Ken Franklin
PostPosted: Tue Mar 18, 2008 7:12 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Aug 25, 2005 4:49 pm
Posts: 1209
Location: Ukiah, CA
mulberry .09

_________________
Ken Franklin
clumsy yet persistent
https://www.kenfranklinukulele.com
Top
 Profile  
 
KenH
PostPosted: Wed Mar 19, 2008 5:15 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 01, 2007 3:15 pm
Posts: 2302
Location: Florida
Osage at .08

_________________
Reguards,

Ken H
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 17 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 69 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com