Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Body Done

Page 2 of 2

[ 34 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

Terence Kennedy

Post subject: Re: Body Done

Posted: Thu Apr 17, 2008 6:05 pm

Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3389
Location: Alexandria MN

I guess the other thing you should check is what scale length the body is built for. It's possible you could have the right fretboard and the wrong neck.
Good Luck
Terry

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.

Top

Mike OMelia

Post subject: Re: Body Done

Posted: Thu Apr 17, 2008 6:06 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

It looks like 14" from nut to 14th fret.

Its 12 5/8" to 12 fret.

Mike

Top

JRHall

Post subject: Re: Body Done

Posted: Thu Apr 17, 2008 6:21 pm

Mahogany

Joined: Fri Oct 12, 2007 11:00 am
Posts: 82
Location: United States
First name: Jimmie (Jim)
Last Name: Hall
City: Columbia
State: SC
Zip/Postal Code: 29223
Country: USA
Focus: Build
Status: Amateur

Terence Kennedy wrote:

I guess the other thing you should check is what scale length the body is built for. It's possible you could have the right fretboard and the wrong neck.
Good Luck
Terry

It looks like the top was cut for a long scale. Thats why the roset joint is uncovered at the end of the fingerboard. The longscale board will cover that.

Jim

Edit: oops, you could be right.

_________________
If you can't do something well, learn to enjoy doing it poorly.

Top

Mike OMelia

Post subject: Re: Body Done

Posted: Thu Apr 17, 2008 7:31 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

JRHall wrote:

Terence Kennedy wrote:

I guess the other thing you should check is what scale length the body is built for. It's possible you could have the right fretboard and the wrong neck.
Good Luck
Terry

It looks like the top was cut for a long scale. Thats why the roset joint is uncovered at the end of the fingerboard. The longscale board will cover that.

Jim

Edit: oops, you could be right.

Yup, looks like a long scale FB on a neck meant for something else. All agree? Wonder what the neck was for?

Mike

Top

Steve Walden

Post subject: Re: Body Done

Posted: Fri Apr 18, 2008 1:37 pm

Contributing Member

Joined: Sat Jul 28, 2007 1:03 pm
Posts: 724
Location: NE Oklahoma, United States
First name: Steve
Last Name: Walden
City: Bartlesville
State: Oklahoma
Zip/Postal Code: 74006
Country: USA
Focus: Build
Status: Amateur

Guys, guys,..... no need to speculate! grab a phone and a tape measure and call John Hall. He is the best authority on this kit. If there was a mistake in the assembly of parts for this kit I am sure he will make it more than right.

Thanks,

_________________
Steve Walden
Aspiring Builder,
Bartlesville, OK

Top

Mike OMelia

Post subject: Re: Body Done

Posted: Fri Apr 18, 2008 3:21 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

....uh, that is exactly what I have been doing. Whats wrong with talking about it too?

John is shipping something out, but did not tell me what it was (yet).

Mike

Top

Mike OMelia

Post subject: Re: Body Done

Posted: Sun Apr 20, 2008 9:59 am

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

John says I have the wrong FB.

Mike

Top

JRessler

Post subject: Re: Body Done

Posted: Mon Apr 21, 2008 3:27 pm

Cocobolo

Joined: Tue Feb 05, 2008 7:52 am
Posts: 434
Location: Sandwich, IL
First name: John
Last Name: Ressler
City: Sandwich
State: IL
Zip/Postal Code: 60548
Country: USA

The pin is to locate the fingerboard properly and keep it in alignment when glueing it to the neck. If the fingerboard has holes in it that fit over the pins in the neck, and the fingerboard does NOT meet the body at the 14th fret, then you have the wrong fret scale of the fingerboard. I have used this fingerboard / neck combination numerous times, and it looks like the fingerboard is too narrow for the neck, even if you were to blend the neck and fingerboard. I'm quite certain you have the wrong fingerboard.

_________________
John Ressler

Top

Mike OMelia

Post subject: Re: Body Done

Posted: Mon Apr 21, 2008 10:31 pm

Brazilian Rosewood

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6983
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro

Hmmm, I did request a 1 11/16" FB. I wanted a narrow FB.

John is working on it.

Mike

Top

Page 2 of 2

[ 34 posts ]

Go to page Previous 1, 2

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: Craig Wilson and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: