***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Aug 22, 2025 12:35 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Tim McKnight
PostPosted: Thu May 26, 2011 7:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1534
Location: Morral, OH
Does anyone know of a source for an ebony end jack threaded cover cap for a K&K pick up? thx

_________________
tim...
http://www.mcknightguitars.com
Top
 Profile  
 
Wes McMillian
PostPosted: Fri May 27, 2011 4:51 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun May 29, 2005 7:17 am
Posts: 622
Location: Santo, TX
No, I don't, but I see an opportunity for some of our talented machinest types here. I bet a lot of us K&K users would be interested, I know I would. Great idea! Who wants to tackle it?

_________________
Wes McMillian
Santo, TX
http://www.wesmcmillian.com
Top
 Profile  
 
Wes McMillian
PostPosted: Fri May 27, 2011 4:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun May 29, 2005 7:17 am
Posts: 622
Location: Santo, TX
BTW, Tim, I played Marty Raybon's McKnight a little while back in Pigeon Forge. Great guitar! [:Y:]

_________________
Wes McMillian
Santo, TX
http://www.wesmcmillian.com
Top
 Profile  
 
Tim McKnight
PostPosted: Sun May 29, 2011 8:36 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1534
Location: Morral, OH
Wes McMillian wrote:
BTW, Tim, I played Marty Raybon's McKnight a little while back in Pigeon Forge. Great guitar! [:Y:]


Thanks for the compliment Wes.

Great ideas guys. Not sure you can anodize K&K caps since they are not aluminum Todd?? I suspect they are either brass or plated steel but I have not stuck a magnet on them to verify?

_________________
tim...
http://www.mcknightguitars.com
Top
 Profile  
 
Chris Pile
PostPosted: Sun May 29, 2011 10:56 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5903
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
You can buy the blackener at any model train or hobby shop. The stuff is quite poisonous, so be safe with it. It's also expensive.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
Howard Klepper
PostPosted: Sun May 29, 2011 12:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jan 25, 2005 6:16 am
Posts: 2692
Paint it, black.

Thanks for dropping in, Tim. We'll see you again next year, I hope. :|

_________________
Howard Klepper
http://www.klepperguitars.com

When all else fails, clean the shop.
Top
 Profile  
 
JBreault
PostPosted: Mon May 30, 2011 7:36 am 
Offline
Koa
Koa
User avatar

Joined: Fri Apr 08, 2005 2:44 am
Posts: 987
Location: United States
First name: Joe
Last Name: Breault
City: Merrimack
State: NH
Status: Amateur
Tim you could try this :http://www.bluestarmusic.com/Tapastring-Vintage-Jack-for-Guitar-wRt-Angle-Ebony-P798.asp, but I think paint would be much more economical.

_________________
Joe Breault
Merrimack, NH
Perpetual novice
Top
 Profile  
 
Tim McKnight
PostPosted: Mon May 30, 2011 9:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 1:43 am
Posts: 1534
Location: Morral, OH
Hi Joe,
I had considered the tapered Ebony end pin by Tapastring. However, it uses a vintage style 1/8" jack which isn't nearly as robust as the larger and more common 1/4" jack. Painting the end cap is not an option on this guitar since the customer has requested ebony.Besides, paint would scratch and flake off rather easily unless it was powder coated and besides that technique would be very difficult to keep powder paint paint out of the threads. Thanks for the suggestions though.

_________________
tim...
http://www.mcknightguitars.com
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com